SOLD 23MM 2-Piece Lug Wrench: Toyota Motor, but not Land Cruiser

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.

dmamj

SILVER Star
Joined
Nov 12, 2017
Threads
615
Messages
2,144
Location
Southwest USA
Location
United States
Toyota used 23MM lug wrenches for a few different models, including early Land Cruiser. The early (pre- 8/1963) 23MM Land Cruiser lug wrench was a 2-piece style (wrench and handle), while later versions were one-piece, 21MM, pry-tip style. Land Cruiser 2-piece 23 lug wrenches were shorter than their 2-piece non-Land Cruiser counterpart: 7 13/16" as opposed to 10 3/4". The handles are the same for both, measuring about 12 1/4".

This listing is for a non-Land Cruiser 23MM lug wrench and handle. That's what you see in the first two pics, and is $40 shipped to anywhere in the lower 48. Super nice shape.

Then the next pic are lug wrenches without handles. From top to bottom, another 23MM, a 21MM, another 21MM. The of those is $25 which also includes shipping in a flat-rate. The beefy at the bottom is 32MM. Not too many folks need a 32MM lug wrench (especially one without a handle) but if you are in the market, here's one for ya. Need to charge a bit more for shipping on that one, so call it $30. If you want to fab handles, the 12 1/4” handle is 16mm in diameter. The handle for the 32MM is 20mm in diameter and is 17 3/8" long.

The last picture is just for comparison, and shows the short Land Cruiser version vs. the longer version.



90558EC3-538B-4202-B126-450C3053DC9E.webp
C0D34776-079B-4D0E-9B3B-5BD4DB36C1D9.webp
41E57F8A-AA19-49B1-A318-62DA1F8B291F.webp
98282106-30C9-4116-8E60-59E73EE6DA25.webp
 
The 23mm wrench with handle is sold, thanks. The others without the handles are still available.
 
Status
Not open for further replies.
Back
Top Bottom