Hey guys - just got my 2014 LC200 back from the shop and I’m having an issue with rub when turning sharply - looks like my front drivers side wheel is rubbing on this thing, which the shop is saying the KDSS - what are my options for dealing with this? I am a total amateur with all this and assumed my outfitter should know what they are doing. Maybe they do but It seems not good….
2014 LC200 rub issue - 35” on 3inch MT65 suspension
- Thread starter APMoney
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
TLC2013
SILVER Star
Anything over 34” will rub the kdss sway bar at full steering wheel lock. There is Lots of good data posted here from members that have made this size work and even larger. Short answer is use the kdss sway bar relocation kit, Link below:
andersonoverlandoutfitters.com
Next issue is stuff the rear wheel and you’ll be hitting that rear fender liner and seat belt bolt. Body lift or longer bump stops to get over this hurdle.
Anderson KDSS Products
Anderson Overland Outfitters your Source Toyota KDSS Solutions for the 200 Series Land Cruiser, and Overland Equipment. 102 Park Ave, Fuquay Varina NC 27526 Rob@andersonoverlandoutfitters.com
andersonoverlandoutfitters.com
Next issue is stuff the rear wheel and you’ll be hitting that rear fender liner and seat belt bolt. Body lift or longer bump stops to get over this hurdle.