#2 bypass & throttle body thoughts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 8, 2004
Threads
45
Messages
1,044
Location
Houston, Texas
While talking to a fellow cruiserhead who is also undergoing an HG repair, he brought up something interesting. The number 2 bypass is routed around the front of the engine and into a nipple on the trottle body, then into a short hose and then back into the t. body and then out to another hose that routes to the head. It seems counterproductive to flow hot coolant into the throttle body as it just heats the air before it enters the upper intake. Would there be a benefit, IE cooler intake air temps, by bypassing the t.body alltogether? It seems easy enough to just route the number two straight to the head. Kind of like doing a phh ectomie.

I would appreciate any thoughts and discussion on this.

Buck Buchanan
 
Somebody told me once that the coolant line went through the TB to avoid vapor lock or something like that. I don't remeber exactly what the explanation was, but it made sense at the time.
 
It is to prevent the TB from freezing do to the Venturi (pressure drop) effect in cold weather.
 
Air cools when expanded - as do most things. For example, grab a rubber band and stretch it and while it is stretched hold it in your hand. It will be cooler than before the stretching. The incoming air expands as it passes over the butterfly and cools the air. Over time the throttle body cools and the moisture in the air will freeze on the throttle body. My '61 beetle used to have this problem if I ran it hard. It would get a 1/16 thick layer of ice on it.

Short message to screw with the #2 bypass.

Karl
 
Last edited:
In other words, MrT engineers are smarted than you... Leave it the hell alone! :flipoff2:

I hate it when people are much more "smarted" than myself. :hillbilly:

I'll have to take yall's word for it here as I really don't know. I do know that many folks thought the idea of a phh ectomie was a bad idea cause if "Mr.T designed it then that must be the best way for it to be done". 35k miles later and when I pulled the phh it looked great with no brittleness or any negative that I could see.

If there is a specific reason for it to pass through the tb then so be it and I'll leave well enough alone but I did think it warranted asking.

Buck Buchanan
 
I hate it when people are much more "smarted" than myself. :hillbilly:

I'll have to take yall's word for it here as I really don't know. I do know that many folks thought the idea of a phh ectomie was a bad idea cause if "Mr.T designed it then that must be the best way for it to be done". 35k miles later and when I pulled the phh it looked great with no brittleness or any negative that I could see.

If there is a specific reason for it to pass through the tb then so be it and I'll leave well enough alone but I did think it warranted asking.

Buck Buchanan


Aw c'mon... I was just playin. :cheers: I understand why you asked... you where just wrong!
 
Buckru and I had a talk about this this morning and he beat me to post the question. I understand the theory of keeping it warm to prevent freezing oof the TB...but...we live in Houston. Winter lasts 2 weeks and right now its over.

I'm just not real clear in the thinking that running 180-190 degree water through the TB while trying to get "cool" air into the engine while living in the south is a problem. I've got a few buddies that are in the hot rod scene, with late model cars that do this bypass and experience no problems at all. Now, I am aware that this is no hot rod or domestic V8, but still there has to be some truth to trying to keep the air as cool as possible until it reaches the point of combustion. Comments, questions, suggestions, and y'alls bashing of my question are welcome.

:beer:
 
Last edited:
I've got a few buddies that are in the hot rod scene, with late model cars that do this bypass and experience no problem at all.

Do they see any significant benefit?
 
I have ran the Tacoma with the bypass plugged for years and have had no problems even in the mountains during cold weather. Now saying that, I haven't done it to the Cruiser.
 
Buckru and I had a talk about this this morning and he beat me to post the question. I understand the theory of keeping it warm to prevent freezing oof the TB...but...we live in Houston. Winter lasts 2 weeks and right now its over.

I'm just not real clear in the thinking that running 180-190 degree water through the TB while trying to get "cool" air into the engine while living in the south is a problem. I've got a few buddies that are in the hot rod scene, with late model cars that do this bypass and experience no problem at all. Now, I am aware that this is no hot rod or domestic V8, but still there has to be some truth to trying to keep the air as cool as possible until it reaches the point of combustion. Comments, questions, suggestions, and y'alls bashing of my question are welcome.

:beer:

+1. And don't forget you have two crankcase vents - one in front of TB butterfly and one aft - also pumping hot air into the intake charge.
 
EricG, the guys (hot rod scene) have seen a improvement in times at the track and have noticed a difference in overall performance with no CE light coming on.

Lockd97 & Ruadhrigh, I'm gonna do it. I see no problem with doing the bypass. If there is a problem, it can always be put back the way it was.

little_joe, your right. there is always warm air coming in through those ports.

So...unless anyone has a viable reason not to do this (not just cause Mr.T built it like that) I'd like to know. I will post results after some time has gone by with this bypass done.

Still, questons, suggestions, are welcome.

:beer:
 
Warmer air helps with fuel atomization. You might notice that it runs rougher, but cooler air is more dense so you might get more power to offset.

Try it and let us know. I might try it in the summer myself.
 
I know I've read on here where somone, CDan or Romer, used a temp gun to measure some temps. I wonder if it would work on the tb for before and after measurements. Maybe put a t with a vale in it just after the hard pipe so you can run straight to the head in summer and through the tb in winter.

Buck
 
Back
Top Bottom