2/79 Fj40 A/c

[Blue60]

Trying to research requirements for installing A/C on my FJ40 (2/79). I acquired an OEM Nipendenso unit with just about everything I need. What are the best references around for doing the install? Found some in the SOR online catalog, I have the FSM and engine manual. Open for any ideas, or pictures regarding an OEM installation.

I have my engine on a stand right now, and would like to put on the three ring crank pulley if anyone has one...otherwise I'll go thru cruiserparts.net for pulley and fan shroud.

Anything else anyone thinks I need please chime in!

Cheers, and Keep on Cruising!

Dave

 

[Poser]

Radiator was different, as was the shroud. The lower hose/pipe and engine mount on the right front side of the engine was different.


Good luck!

-Stevee

 

[cruiserbrett]

Radiator was different, as was the shroud. The lower hose/pipe and engine mount on the right front side of the engine was different.


Good luck!

-Stevee

Lots of stuff is different. you can use an FJ60 three groove pulley. Radiator is diff. Shroud is diff. radiator support is different. hoses are different, battery tray support is diff. Heater duct is different, etc. etc.... When you mean everyting, I hope you got EVERYTHING. you can certianly make do without though. I dont think there is a factory manual for the setup, and the OEM FJ55 A/C manual does not cover FJ40 setup at all, since they are very different.