1996'Cruiser

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 13, 2007
Threads
1
Messages
5
Hi

Just purchased a used '96 Black Cruiser -- Still getting the hang of it ..

I have noticed a couple of issues ..

a. Only when the Car is in Park there is a buzzing sound like kir.....

While driving it is smooth as silk ..

Any ideas on the source of this noise or problem ?

b. Also a tiny bit of oil leak -- next to tranny .. (not sure whether it is tranny or rear main seal) ..

Any idea as to source of the oil leak ?



Beside that the truck is clean ...

No leaks around or under the block ..

Of-course there are the usual issues ..

a. Drivers seat cracks and seams stitching coming apart ..

b. Hole in the Left Headlight lens ...

c. Windshield was cracked -- got that fixed ..!


Do any of the past threads -- have answers to above questions ?

Please do link them .. !

Also -- any idea of Costs involved in fixing the above two issues ?

Especially -- Buzzing noise ..

&

Oil leak !

TIA ..
 
First off, welcome to the obsession that is all things Landcruiser! :flipoff2:

The oil leak sounds "normal", if it is indeed the rear main seal. There is at least one thread about resealing it, but it was fairly involved. My truck has the leak, and I don't plan on doing anything about it at the moment. Consider it free rust proofing!

Double check that the windshield was installed correctly. There are a bunch of threads on here about leaky windshields and puddles under the carpet. Make sure the shop used a new gasket and urethaned the glass to the gasket and the gasket to the truck. Otherwise they have a tendancy to leak.

Black 96's are great, I like mine a lot!
 
Oil leak could even be the valve cover. The back three bolts on mine were only finger tight and leaking down the back of the block, looked just like a rear main at first glance.
 
Heard of another black FZJ80 1996 on the Gulf Coast of Florida, was a trade to a local Ford Dealer
who then sold it to a local used car dealer.

No lockers, 160K miles, MIL light on, don't know what (probably P401);
they want around $7800 but may wholesale it soon due to the MIL, so now is the time to deal
if anyone wants a black 80 without lockers. The flares apparently were repainted and are faded,
overbuffed, or just screwed up

Used car dealer that has it currently on their lot: 850-581-0893

g
 
TIA for all the replies !

The buzzing sound is low pitch and looks like it is coming from the front of the block ?

May be some pulley bearings ?

I did manage to get the Drivers side Headlight from a Salvage yard in TN --

Initially the guys quoted $120.00

Then as they pulled it out-- they broke off the Plastic Ear Flaps of the 2 Connectors ... !

So they sold it to me -- for $50.00 + 10.00 Shipping ..

I purchased it thinking -- May be I can switch the lens from bad one to my broken lens ...

I found a link from the Web that stated you could separate the "lens" from the lens assembly using a Hot air blower and exacto knife ..

Thought I could give it a try ..:)

They did send both broken flaps -- though !


I called around and found a Specific 3 M Epoxy made for Automotive Plastics -- -- Its called "Structural Adhesive #8101".

It retails for $20.00

Glued both Ear Flaps back on -- They are now stronger than the original piece of flimsy sh**t that Toyota had put on the light assembly .. !

The local dealers in WA were asking ...

$211 for lens alone ...

$272 for lens + bulbs etc etc ...

Cheers,
 
TIA for all the replies !

The buzzing sound is low pitch and looks like it is coming from the front of the block ?

May be some pulley bearings ?

I did manage to get the Drivers side Headlight from a Salvage yard in TN --

Initially the guys quoted $120.00

Then as they pulled it out-- they broke off the Plastic Ear Flaps of the 2 Connectors ... !

So they sold it to me -- for $50.00 + 10.00 Shipping ..

I purchased it thinking -- May be I can switch the lens from bad one to my broken lens ...

I found a link from the Web that stated you could separate the "lens" from the lens assembly using a Hot air blower and exacto knife ..

Thought I could give it a try ..:)

They did send both broken flaps -- though !


I called around and found a Specific 3 M Epoxy made for Automotive Plastics -- -- Its called "Structural Adhesive #8101".

It retails for $20.00

Glued both Ear Flaps back on -- They are now stronger than the original piece of flimsy sh**t that Toyota had put on the light assembly .. !

The local dealers in WA were asking ...

$211 for lens alone ...

$272 for lens + bulbs etc etc ...

Cheers,

The self repair sounded like a good deal.
Nice to know there is something that can repair plastics crap
that breaks.

Regarding the noise; is it near the alternator?

Mine had 4 different noises when I first got it;

First thing I would do is to spray some water on the belts
with the engine running; if the noise if from the belts,
it will go away and then come back in a few seconds.

If it still is making the noise, next I would consider the alternator;
when the bushings go bad it kinda sounds like a buzzing, a rotating
buzz.

My bet is on the belts; they always make noise if serviced
by anyone other than the dealer with anything other than
OEM matched belts; properly installed. They do come in a matched pair for the alternator and that is what you should use;
look at your belts; can you find the word MITSUBUSHI
on them anywhere? That is what the Toyota belts say.

g
 
Finally got a chance to Take the LC to my Toyota Mech

Hi:

Finally Got to Take the '96 LC to Toyota Mech --

The Drive Belts were brand new Toyota Factory Belts -- I replaced them just the same -- about $50.00

The Noise that I had heard -- Sound like its coming from the "Solenoids" in the Transmission.

The Mechanic said that 1 of the Solenoid is Sticking

There are 3 Solenoids used with the Tranny

1. First Solenoid is $290.00

2. Other Two Solenoids are $190 bucks each ?

The Oil leak was from the Rear Main Seal ---

I need some help -- Does anyone here experience the same issue ?

If -- So which Solenoid was needed to be replaced ?

TIA -- Cheers.
 
Back
Top Bottom