1991 Keyless entry retrofit?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 6, 2009
Threads
15
Messages
95
Location
Utah
Looking to install keyless entry on the 1991. Is there a plug-and-play solution for this? I suppose I am hoping that there are used Toyota boxes/fobs available out there. Any aftermarket plug-n-plays? I'd really like to avoid taking off door panels and splicing wires, etc.
 
I'm fine with that. Are there any plug-n-play products you are aware of?
 
No, :( sorry. But I have Scion with a clifford matrix 2.0 (i think that is the model) I've been really happy with. i like the 2 way audio feedback from the clicker :) and was installed by the shop that did the stereo, install was $35 or so bring the total to just under $200.

I could be very wrong, but not sure there is any plug-in-play for the 91's. Seems even to retrofit one would require some splicing and wiring and may as well get some of the newer technology with the aftermarket.

Just my .02
 
Nothing plug and play, the wiring is just not there like the 80s with the RS 3000 installed. But, since you have power locks, adding an aftermarket security system is really easy, and prolly cheap.
 
Back
Top Bottom