1979 40 wiper problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I had the same problem . They had slipped out of adjustment where the linkage attaches to the motor. You can pull the motor off and readjust the arm, the linkage just pops off the arm . Or you can pull your defroster vents and access it that way.
 
Mine were acting in a similar fashion. What I did was to pull the cover off the wiper motor, clean the electrical connections and lube the gears. After putting it back together, I am very satisfied with the result.

Best regards,
 
Back
Top Bottom