16" taco steel rims $80 set of 4

[informationjunky]

Location

United States

Set of four taco rims
approximatly 4 3/4 backspacing,
16x7
prefer pickup around Atlanta

 

[notagp_afj55]

did you have these mouneted and running on one of your
cruisers? How was the backspacing on the tie rod ends?

 

[Truckasaurus]

Count me in, next! (And, yeah, if you could share where these were used, that'd be cool.) (PM'ed ya, just to make sure my spot is secure!)

 

[BELMONT148]

I have a set like these on my 40. See my build below. Project Evelyn. You have to run spacers. I used 1.25 but you may get by with 1".

Jeremy

 

[e9999]

have the same or similar on the 80
all is well...

 

[Truckasaurus]

Eric,

So do you need spacers on your 80? (You didn't clarify and confirm, so I am! )

Thanks, bud. (And thanks for the deep dive on GPS portables...)

 

[e9999]

no spacers need that I know of on my '97.

(sorry IJ, didn't mean to highjack)

 

[Ting]

no spacers need that I know of on my '97.

(sorry IJ, didn't mean to highjack)

Eric - can you post some pictures?

 

[informationjunky]

I havn't mounted them, not sure about different cruisers backspacing....I bought them to put on my 80 but picked up a second set of alloys and wife wants me to clean out garage (hint, I have these, a set of lx470 rims, second set of 305's and a set of 315 mtr's ). They weigh about 30 lbs each shipped from 30043.

 

[notagp_afj55]

I'll pass on the wheels

 

[informationjunky]

ttt

 

[BELMONT148]

Wanna sell one?

 

[informationjunky]

Sorry, I don't want to split set.

 

[informationjunky]

rims are sold.