15" wheels ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 22, 2007
Threads
22
Messages
57
Hey guys I bought a set of locking axles from a 94 to run under mey project truck and have decided I am going to need to run beadlocks for the snow and sand arround here. So my question is can I run a 15inch wheel by clearancing the callipers or runing a diferent caliper or does anyone know of an diy beadlock kit. I would really like to keep the aluminum wheels I have and I don't really want to go with the stauns I hear they have wear issues and they are pricey. any help or ideas will be appreciated hers some pics
cherry picker 034.webp
cherry picker 033.webp
cherry picker 032.webp
 
you could use a spacer, no?
 
FYI rear calipers from a JDM HDJ81 are slightly smaller, and clear 15" wheels.
 
which is like totally easy for a canuckistanian to get...but I'd think they're sorta rare in the lower 48...

:rolleyes:






or am I totally off the mark?
 
16 inch wheels work alot better. Other wise you have to space the wheels out 2 inches or so to clear tie rod and calipers. It just depends on the back spacing of your wheels.
 
16 inch wheels work alot better. Other wise you have to space the wheels out 2 inches or so to clear tie rod and calipers. It just depends on the back spacing of your wheels.

Isn't the issue with 15" wheels that the calipers for the rear wheels come in contact?
 
I was able to put my 15" wheel on the back of my 93 fzj80 but the front wouldn't bolt on due to the tie rod and the off set of the wheel.
 
Back
Top Bottom