how to

Greetings from sunny Arizona. I just had a Toyota factory rollbar shipped to me… Came from Canada… I’m looking at installing it in my 67. Any tips? Obviously, I’ll need to drill holes and probably make a plate for added strength versus just the thin sheet metal.

Gday everyone, been looking into removing my ACSD but couldn’t find a lot of information on how to do it, so I jumped right in and gave it a crack, and thought I’d put a post up on how to do it. The blanking plate I used was off of a TD42 10mm injection pump, pretty certain most VE pump blanking...

I think this is my first post. I have a 94 cruiser nothing special it’s my daily with an ome lift. Anyway. I replaced the heater core and could not find a comprehensive write up or video on how to do so. So I made one, and it’s nearly an hour long. I’m no film maker but I think it does the job...

I'm sure everyone knows how to do this, but i did not see any threads showing the steps; this might help a newbie prepare for the job. So, ever since i bought my LX, it's had a pretty excessive idle. After drives, when it went in park it would jump from 800 to about 1.5k RPM. When i put my foot...

It's been posted elsewhere, but here's the easy way to install the passenger side upstream O2 sensor for code PO155 Oxygen Sensor Bank 2 Sensor 1 Total time about 10 minutes. 1) Get a Denso Direct Fit Oxygen Sensor part number: 234 4169 2) I was on the passenger side and broke it...

had a full wheel bearing and rarer drum brake rebuild done by one of my mates and we shot this how to video, might be useful if anyone is getting stuck into this. My mate Richard used to work with MH motorsports in the rally championship in Uk and he knows some handy tricks.

had a full wheel bearing and rarer drum brake rebuild done by one of my mates and we shot this how to video, might be useful if anyone is getting stuck into this. My mate Richard used to work with MH motorsports in the rally championship in Uk and he knows some handy tricks.

Never done Birfs in My life, But Im going to do them anyway. Unbelievable how fast these arrived. Now I have to tear it down. Any tips,tools etc all input is welcomed. Im not a pay a stranger that dosnet love the truck they are working on, so with a lot of youtube help(powermodz) and the FSM Ill...

Hi I just got those new parts (oil sending unit/coolant temp sensor) and Im planning to install them later this week and I want to see if someone can help me with a doubt that I have. Do I need to use any type of tape on the threads for both parts before install them? Additionally I will like...