Looking for pics of Saginaw PS box mounting plates...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

This plate is sold by Custom Cruisers FJ40. I don't remember what I paid for it. http://www.customcruisersfj40.com/

attachment.php


attachment.php


attachment.php
 
Hi Max,

Jack Rice has a couple of photos of his Saginaw box with shackle reversal in his write-up in the tech links.

http://medusa.ih8mud.com/cruiser/FJ40.html

If you need views from other angles and/or advice on making the four-bolt compatible with the shackle reversal, I'm sure he would be happy to provide them.

jrice@darkwing.uoregon.edu

Todd.
 
Here are a couple of pictures of my first pass using the long S/R spring hangers.
In the end I tore all this out and redid it so I could use shorter spring hangers.


(click on thumbs for full size.)
 
Wow!

Thanks to all. This does give me some ideas. The install of my current PS is less than perfect.

1) Have 3 bolt box instead of 4 bolt box
2) Really short spring hanger as part of shackle reversal
3) PS box mounting plate is mounted away from frame rail
4) Box bolts do not go througgh the frame rail
5) Impossible to use the correct beefy(7/16") bolts with two of the 3 holes as the actual PS box gussets are in the way. Two bolts have to be threaded in from the left instead of the right
6) 1-5 makes it a nightmare for emergency trail repairs!
 
CruiserMax said:
Wow!

Thanks to all. This does give me some ideas. The install of my current PS is less than perfect.

1) Have 3 bolt box instead of 4 bolt box
2) Really short spring hanger as part of shackle reversal
3) PS box mounting plate is mounted away from frame rail
4) Box bolts do not go througgh the frame rail
5) Impossible to use the correct beefy(7/16") bolts with two of the 3 holes as the actual PS box gussets are in the way. Two bolts have to be threaded in from the left instead of the right
6) 1-5 makes it a nightmare for emergency trail repairs!
2) Why is this a problem? I did a lot of changes to make my spring hanger shorter.
3)A pic would be nice here, mine is mounted away from the frame but so far no problems.
4) If you run the bolts throught the rail conventional wisdom is you will need to use a stiffener tube to keep the rail from bowing in. I elected to cut an access hole for the bolt head with a hole saw. This has very little effect on the strength of the frame as long as there are no sharp corners to the hole.
5) Pic?
 
Back
Top Bottom