WTB Toyota '78 FJ40 HT Screws

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

dealer or SOR.com
 
Rear doors are held on by phillips head, 6mmx1.0x20mm, iirc.


Top is attached to the body with hex head, 6mmx1.0x20mm, again, iirc.


If it were me, I would install the rear doors with hex head hardware, grade 10.9....as I HATE junk 8.8 metric hardware, especially the phillips head fasteners used by Toyota.


:beer:
 
Back
Top Bottom