Turn Signal short? Bad Bulbs...?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2005
Threads
35
Messages
271
Location
Crested Butte, CO
I need help or any good ideas on what is going on. Today when hitting the brakes I noticed my right turn signal on the dash lit up. So I proceeded to try and troubleshoot it a little.
Everything works as it should when I am not applying the brakes, however if I hit the brakes the front and rear right turn signal come on and stay on until I release the brakes as well as the indicator on the dash.
If I turn the left signal indicator on it works fine until I hit the brakes then the turn indicators act as if I had the hazards on.
I also replace the right rear bulbs for the turn signal and brake / lights....

Any Ideas.....:confused:
 
Just places to start but I'd check for a good ground and maybe replace your flasher.
 
To your question of whether or not I have trailer switch wiring I do and am hoping to mess with that probably this weekend. In my current situation I hope the problem goes away ;p but I will probably be pulling the trailer wiring and checking ground wires....Electrical problems are so much fun...:mad:
 
Nemo;

It's to early in the morning for my brain to begin thinking, however, I did some study a while back on a strange and fairly rare problem that our 80s would show if the brake light fuse blew. If I remember correctly, what happens is the brake light bulb filament blows and then shorts to ground. The way Toyota has this wired will cause about 4 other circuits to act very weird. Flashers, cruise control and some others.

This shorting of the bulb internally is rare and may not blow the correct fuse, but present a partial short, low resistance circuit to the other circuits, making trouble shooting particularly frustrating.

Pull the brake light bulbs and see if troubles disappear and check the bulbs with an ohmmeter.

...
 
Nemo said:
To your question of whether or not I have trailer switch wiring I do and am hoping to mess with that probably this weekend. In my current situation I hope the problem goes away ;p but I will probably be pulling the trailer wiring and checking ground wires....Electrical problems are so much fun...:mad:

My GUESS is a bad diode in the converter box. Disconnect the box
 
Problem is fixed. It was the Trailer Hitch Converter Box. Little black box in right rear well.....:) Do you think replacing it is the fix or will the Converter Box be OK with some grounding or something like that. I unplugged the Trailer side from it and that didn't fix it. Only until I unplugged it from the Truck side if you will solved the problem.....?
 
Back
Top Bottom