Need a 73 - 83 Mechanical Linkage picture for an Aisin Carb

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2002
Threads
68
Messages
1,643
Location
Portland, OR
I'm looking for a picture of the complete set up for the mechanical linkage to the aisin carb. Here is a picture from SOR. I know i'm missing a spring and some minor stuff. Anything will help.

042F.gif
 
O.K.
You want a shot of the carb linkage in a 40 or a 55? (both '74)
 
Robert LaDuke said:
Here's a shot of a '78 accelerator linkage. Bottom of picture would be drivers side of truck.

Did you have to use an after market spring for your carb? And where does the spring connect to that is on the right side. Thanks.

Travis
 
I took this shot standing on the bumper. You can see the spring a little better.
It attaches to the arm on part # 55 of your SOR diagram.
Mines all stock, the spring came with it.
Correct, there is a pin and a nylon washer attaching the middle linkage to the carb.
Image05.webp
 
Thanks Poser, I saw this but unlike Green Weeny 78 I'm still trying to figure out how to get a basic bracket onto the carb, then gotta actually see the parts I need... Wish I would have know about the huge differences before I chose a 78 carb to have rebuilt. Seems there is some other aisin 2bbl that I could have stayed with a cable setup. Oh well.
 
Back
Top Bottom