Sequoia wheels repaint

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 20, 2006
Threads
197
Messages
4,673
Location
TN
I bought some sequoia wheels off ebay and thought they would look better darker so I spray painted them.
Duplicolor paint code HWP102 Graphite. I also used the clear wheel coat.

Pics on the vehicle https://forum.ih8mud.com/showthread.php?t=178141

Here is a link that I used that is very helpful if anyone else wants to paint thier wheels.
http://forums.clubrsx.com/showthread.php?t=373892

The gray is a very close match to the factory front and rear bumper and the rspray paint left overs could be used to touch them up.
 
Last edited:
wow, i like that alot. think i might be at the paint store this week!
 
I got 2 cans of the Graphite and 2 of the wheel clearcoat and just put a ton of coats on them.

They look a lot better in person.

wow, i like that alot. think i might be at the paint store this week!
 
Like that alot. Have you considered painting the hub and lugs? My understanding is the Sequoia caps don't fit.
 
The caps dont fit, even with the spacers. I think it looks better with the caps off when the wheels are a darker color anyway.
The hubs on mine look ok but the lugs definitely need a little paint.

Like that alot. Have you considered painting the hub and lugs? My understanding is the Sequoia caps don't fit.
 
erg80,

How did you prep the wheels? I'm thinking of using the wheels from my Tundra for my 80.
 
Looks great, I'm planning on powdercoating a set in about the same color. I read through the link you posted up, but like Gotmud I was wondering about your prep. What grit sandpaper did you use ? How much prep time for each wheel ? I don't really want to spend a few hundred dollars to get my wheels sandblasted, I think I would rather spend a few hours sanding.
 
Looks great, I'm planning on powdercoating a set in about the same color....... I don't really want to spend a few hundred dollars to get my wheels sandblasted, I think I would rather spend a few hours sanding.

I've gone the sandblast / powdercoat route before myself - getting your wheels etched with a sugar sand is really cheap - I paid $15 per wheel ('01 prices) since I was doing a simple design (5 stars) - most 'Yota wheels seem simple too - at least that's all I'd buy for off road use.

The guy who did it said he charges quite a bit more to do mesh-style wheels, like my total bill would have been 3-4x as much.

Also, getting a wheel etched really gives a surface the powder can get in, vs. the time & effort to sand & possibly get it done as well.

If you are spending the money to powdercoat then I'd personally spend the little extra on prep to get a good bond - you'll forget the cost up front quite quickly, but if your powdercoat starts popping off easily down the line you'll kick yourself for being cheap.
 
I washed the wheels with degreaser and a brush, then a wash mit.
Then I wet sanded them with 240 grit sandpaper until I got throught the paint. Then rinsed them well, and let them dry. I didnt use any bondo like the link did.
After they dried I wiped them down with a dry soft cloth. Then primed and painted.

It only took a few hours to prep and paint the 5 wheels and they look really good. Only cost about 40 bucks plus the time.


Looks great, I'm planning on powdercoating a set in about the same color. I read through the link you posted up, but like Gotmud I was wondering about your prep. What grit sandpaper did you use ? How much prep time for each wheel ? I don't really want to spend a few hundred dollars to get my wheels sandblasted, I think I would rather spend a few hours sanding.
 
Any recommendation on the primer? Brand? type? etc? :confused:
How the wheels holding up? :hhmm:
Also I cant see the pictures? Can you re-post some? Thanks.:cheers:
 
Any recommendation on the primer? Brand? type? etc? :confused:
How the wheels holding up? :hhmm:
Also I cant see the pictures? Can you re-post some? Thanks.:cheers:

I think I used regular Duplicolor primer.

All of the wheels are holding up great except for one. The gray paint is flaking off and leaving a smooth gloss black finish underneath. :confused: Im not sure why.

If i was doing it again I would use some adhesion promoter before the primer hoping it would help with the flaking of the one wheel.
wheel.webp
 
Back
Top Bottom