Intro of my new vehicle and myself with lots of pics

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2007
Threads
121
Messages
734
Location
Edmonton
I’ve been on the board for a couple of weeks now, asking questions on how to modify and upgrade things in the anticipation of receiving my ‘new’ 80. The board and some boardies have been very helpful and I’ve already learned a lot in my short time on here, thanks!

My name is Jeff and this is my second Land Cruiser. My first was a 1981 BJ60 that I bought off of a local guy. I ran 35” BFG mudders with a 4” lift and had an 8274 up front. I got into a lot of trouble in that thing. I hand crafted a snorkel out of black PVC from Home Depot. Sounds crude but I got the angles just right and it looked awesome, plus it was absolutely bullet proof.

My new Cruiser just came off the boat from Japan. I was dealing with a local broker there who also has a web site (Silverpeaktrading.com) Sean did an excellent job. Scary buying a vehicle online and over the phone being sight unseen, plus it’s a LONG trip from Japan to Canada, the anticipation is a killer. The seller said it was clean, but that was an understatement. The vehicle is like new both inside and out and has the typical HDJ81 goodies including 4.2 turbo diesel, sun roof, heated seats, AC, cooler in the console(and an ice maker..sweet!), lockers front and rear and lots of buttons on the dash to control other things that I will barely use, plus it only has 51,000 kms on it. The vehicle went through Toyota in Japan for an inspection and I had a little work done there (mostly maintenance and some heating elements for the seats!) including an undercoat to help with the Canadian winters, but really didn’t need anything done over there except for some new seals in the fuel pump.

The vehicle JUST passed out of province inspection on Tuesday and I didn’t have to do anything to it except get new rubber. I took it upon myself to change out the front head lights to a North American spec (that was my mod). I ordered FJ80 headlights from Cruiserparts.com I think it was and complimented them with 4 HIR 9011s, 2 for bright and 2 for lows. The new rubber is BFG ATs, 33x10.5R15. I don’t have a lift on it right now but I do have a 2.5” OME Heavy/Med kit sitting in the garage waiting for install with some packers for the front to try and even it out a little.

I’m currently looking for a good mechanic in the city(Edmonton) to do the big end bearings which are maybe faulty, maybe not….I just want to be safe. I’m driving it now but don’t want to do too much until I have that done. Anyone else dealt with a good JDM mechanic in Edmonton?

Anyhow, here are some pictures of the new rig from first site to current. I’m really excited to have it and can’t wait to do a couple of more things in the future (remote start, tint, new radio, Hella 4000s or Light Force 240s up front). It is going to be a daily driver with some light off road for now until I can afford to have it down for a while incase it needs repairs etc. My wife likes the truck too but still isn’t sure about riding on the wrong side of the car yet.

Thanks for looking guys! I look forward to spending a lot of time on the site.
-Jeff

NewCar2.jpg


NewCar3.jpg


NEwCar001.jpg


NEwCar003.jpg


NEwCar004.jpg


NEwCar005.jpg


NEwCar008.jpg


NEwCar009.jpg


NEwCar010.jpg


NEwCar011.jpg


NEwCar012.jpg


NEwCar013.jpg


NEwCar014.jpg


NEwCar016.jpg


NEwCar017.jpg


NEwCar018.jpg


NEwCar019.jpg


NEwCar020.jpg


NEwCar025.jpg


NEwCar026.jpg






 
Last edited:
To mods: we definitely need a "drool" smiley there.
Congrats on your incredible purchase.
:cheers:
 
Clean Rig, everything but the winch too.

Looks like you figured out the spare tire lock as well, mine need some "convincing" from a pipe wrench before it would work.
 
Last edited:
sweet! beautiful!

(are these skinny straps all that's holding it in the container? :eek:)

(oh and this ice maker is that with a little cube tray kinda thing you have to fill? doesn't have a water reservoir, right?)
 
Amazing buy and well worth the wait! Can't wait to see the finished product!
 
you my friend, have a great looking vehicle. great purchase. i am sure the anticipation was absolutely killing ya. enjoy the ride.

cheers.:flipoff2:
 
Love the tire carrier, anyone know where those can be purchased?
 
That is one of the most amazing 80's I have ever seen. You are truely blessed to have the 15yr import rule.

Cheers:beer:
 
Mmmmm.... Box full of Land Cruiser!


That's the nicest one I've seen yet. Even though your not here, you should check-in with the Vancouver Island Cruisers in the international club section at the bottom of "Mud. There are a few more HDJ81 owners there, and they know all the good places - I'm sure one of them will know someone in Edmonton who could do the BeB.
 
WAY nice...drooling all over the place
 
Back
Top Bottom