The A/C mod is complete

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 7, 2005
Threads
314
Messages
1,336
Location
Dallas, Texas
Not much info on this guys.....In my previous posts I spoke about the colder A/C mod. Here goes:
After $2,000.00 and 90,000 miles the truck has a knuckle job, PHH, other new hoses, valve body mod, Valve cover gaskets, A/C mod, A/C service, I'm very pleased with it.
The A/C mod: Well, my mechanic won't give up HOW he did it. He only said he stuck a blower motor from the Denali and fit it in the evaporator. Again, he fabbed it to fit and it does blow much harder. Of course the weather is cooler now but I know it's much colder and stronger....my polo shirt collar actually flaps up and down from the A.C vents. He claims the blower is blowing about 250 RPM faster than factory. He says he cleaned out the evaporator as there is lint in there and dirt in there after 12 years. I realize this does not help as to how he did it, but realize after 5 weeks of him having it, I could never document how he did it....and he was very tight lipped about it anyway. I know many of us can do the fab of the GMC blower once you open up the evaporator.
A/C is finally getting to the back of the truck and in Texas, it will get hot again before winter...so I'll find out soon enough.

airlaird
 
Autopsy it.......................:hillbilly:
 
Not much info on this guys.....In my previous posts I spoke about the colder A/C mod. Here goes:
After $2,000.00 and 90,000 miles the truck has a knuckle job, PHH, other new hoses, valve body mod, Valve cover gaskets, A/C mod, A/C service, I'm very pleased with it.
The A/C mod: Well, my mechanic won't give up HOW he did it. He only said he stuck a blower motor from the Denali and fit it in the evaporator. Again, he fabbed it to fit and it does blow much harder. Of course the weather is cooler now but I know it's much colder and stronger....my polo shirt collar actually flaps up and down from the A.C vents. He claims the blower is blowing about 250 RPM faster than factory. He says he cleaned out the evaporator as there is lint in there and dirt in there after 12 years. I realize this does not help as to how he did it, but realize after 5 weeks of him having it, I could never document how he did it....and he was very tight lipped about it anyway. I know many of us can do the fab of the GMC blower once you open up the evaporator.
A/C is finally getting to the back of the truck and in Texas, it will get hot again before winter...so I'll find out soon enough.

airlaird

So who's the mechanic?
 
Can you at least get the part #s off the Denali fan?? or at least what year it came from? (i am in Qatar right now) but i am guessing there might be some variation from year to year.

Thanks

dan
 
Well I asked him that....he never gave it up... Some mechanics pride themselves on their secrets.
airlaird
 
I'm not an expert in heat transfer, but I will speculate that you're getting more benefit in total cooling from the cleaning than the faster blower. A/C systems are rated at BTUs which is a measure of heat transfer. If that's a constant (and I think it is), then a faster air movement simply means the air temp is slightly warmer but faster moving. It may feel better on your body due to wind chill, and get to the rear - both benefits - but total system capability in terms of cooling the cabin is unchanged.

I've been preaching condensor cleanouts for years and have measured huge temp decreases at the dash vents simply by doing that 20 minute procedure.

I'll be interested in hearing how it works out with Summer on the way. Too bad you didn't take a dash vent temperature reading before/after.

DougM
 
I cleaned out my condensor every year, usually with simple green follow by a thorough hose down. I'm going ot pull the fan evaporator fan unit and clean the evaporator this season. I also have the JDM electric condensor fan from CDan that I will be installing along with my aux fuse/relay box in the engine bay.

The 80 series AC systems in the US is simply not up to the task of cooling in the southern regions like Texas. While the front row cools down fast enough, the middle row and third row passengers have to sweat it out when the temperature climbs above 100F here in Texas - usually with some pretty high humidity.

While the AC compressor is identical in all the 80 series, the lack of cooling in the US market 80 series can be attributed to the following:

1. R134 has about 70-90% of the cooling efficiency of the R12. The 80-series was originally designed to use R12. The R134 changeover in 95(?) did not increase the condensor, evaporator, nor any of the components affecting cooling except the compressor.

2. The lack of air movement to the rear of the vehicle from the front AC fan. Since the AC system was orginally designed to have dual AC (front and rear) and console fridge using the same compressor and condensor. A higher volume evaporator fan should cool the interior better, not to mention distribute the air to the rear better.

3. Poor AC cooling at low vehicle speed due to low engine speed.
By adding in the condensor fan , it should help with the cooling of the AC.

Other things that can also help are tinting the windows and keeping the car parked under shades in hot sunny days.

I'l report back my results when I complete my mods.
 
Middle East specs LC80, with the aux fan on the front of the condenser and rear A/C and compressor-fed cool-box, blows cold like no other car out here. I'll try get the compressor number from the dealer.

Definitely the evaporator behind the glove box needs regular cleaning as it gets completely caked in fine dust.

IdahoDoug says it straight: "a faster air movement simply means the air temp is slightly warmer but faster moving. It may feel better on your body due to wind chill, and get to the rear - both benefits - but total system capability in terms of cooling the cabin is unchanged. "

And, yeah, window tinting is a must. And light color cars have a big advantage.
 
i found by cracking the rear windows slightly in the back, it really helps draw the cooler air from the front to the back seats, as long as you dont open them to much it doesnt seem to be a dramatic loss of the cooler air
 
lockd-97- see if you get more out of the guy than airlaird did. If so, do share.
 
anyone ever find out if the modded blower has an effect?
 
Back
Top Bottom