Driveshaft 101

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2003
Threads
186
Messages
3,183
Location
Tulsa, OK
I'm calling this driveshaft 101, not cause I want to school ya'all on driveshafts, but cause I want someone to school me on the basics - like -

1. How to measure Driveshaft angle?

2. How to measure U-joint angle?

3. What is acceptable for both the above?

4. What is a DC shaft?

5. What is an acceptable angle set-up for DC shaft?

6. What is a CV joint? (actually, that one I know, but to be complete)

7. How can a CV joint help with extreme angles on driveshaft or mismatched angles?

8. Why do we not see more CV joints used on 80's?

9. What is pinion angle, and how does it relate to driveshaft performance?


I'll be clear from the get go, not real interested in "it depends" answers. Like for U-joint angle. Sure it's going to vary, but "GENERALLY" what is acceptable for stock u-joints? Other u-joints?

I'm sure I could find something generic on how things work or some site like that, but those usually don't into the lifted realm.

I'm in the 'lucky' category right now, lift I want, caster I need, and no driveshaft vibes, so this is more for general knowledge, and to help anyone else who may be going into unknown lift and caster options.
 
http://www.vibratesoftware.com/html...Reference/propshaft_angle_correction_tool.htm

A DC or double cardan is what Toyota calls their CV or constant velocity joint. Search for this as there is a wealth of info here.

Pinion angle is , well, the angle of the driveshaft mounting flange. It is usually refered as referenced from vertical. If you put a CV at the transfercase then one can 'point' the pinion upward to elimate u-joint binding on severe angles and get rid of vibration cause by driveshaft flanges that are not parallel. Each ujoint creates a sine wave of acceleration and decelleration as the driveshaft rotates. On a DC or CV the two waves cancel each other.

To measure the abgle a simple angle finder from Lowes/HD or Harbor Freight works fine.

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=34214
 
Last edited:
Back
Top Bottom