electrical questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2002
Threads
243
Messages
3,587
I have a few electronics questions that are coming up during my dual battery system install.
the system: I am going with a main battery and a deep cycle auxiliary. They will be connected with the new 200 amp isolator from mobi arc.
The aux will wire into a fuse block (6 curcuits) to power stuff.

2 questions:

1) fuse block: I like the blocks from Blue sea systems. The 6 circuit comes with a 'negative bus' and without one. (http://www.bluesea.com/dept.asp?d_id=7463&l1=7463) what does that mean please? what will I need?

2) Currently the radio runs off the main battery. I will connect the constant power to the aux, and then want a 3 way toggle switch, where position 1 hooks it to the main circuit, which is powered over the ignition. position 2 will hook it to the auxilliary battery. basically I need a simple on-off-on rocker switch. where do I look for those? summit didn't really have much...
thanks for the help!
Jan
 
I have a few electronics questions that are coming up during my dual battery system install.
the system: I am going with a main battery and a deep cycle auxiliary. They will be connected with the new 200 amp isolator from mobi arc.
The aux will wire into a fuse block (6 curcuits) to power stuff.

2 questions:

1) fuse block: I like the blocks from Blue sea systems. The 6 circuit comes with a 'negative bus' and without one. (http://www.bluesea.com/dept.asp?d_id=7463&l1=7463) what does that mean please? what will I need?

2) Currently the radio runs off the main battery. I will connect the constant power to the aux, and then want a 3 way toggle switch, where position 1 hooks it to the main circuit, which is powered over the ignition. position 2 will hook it to the auxilliary battery. basically I need a simple on-off-on rocker switch. where do I look for those? summit didn't really have much...
thanks for the help!
Jan


1) the one with the negative bus gives you a place to land all your ground wires. Otherwise they are landed on the vehicles common ground.
2) If you are trying to provide two different power sources for the radio you would use a single pole double throw switch.
 
1) As Phil said, the negative bus is ground. If you want to run separate ground wires to your circuits, this is a convenient connection point [the neg bus should be connected to battery (-)]. This is intended for boats, where you don't have a continuous metal structure as a return path for electrical devices. You shouldn't need it if you make sure that your frame, engine, and body are well grounded.

2) Waytek, Newark Electronics, Allied Electronics, and even Radio Shack should have something suitable. Why in the world do you want to switch power to your radio? Why make the electrical system more complicated than it needs to be?

3) Doesn't Mobi-Arc want an arm and a leg (and possibly first born child) for their isolator? Last I recall, that thing was way over-priced. Just my opinion.
 
1) As Phil said, the negative bus is ground. If you want to run separate ground wires to your circuits, this is a convenient connection point [the neg bus should be connected to battery (-)]. This is intended for boats, where you don't have a continuous metal structure as a return path for electrical devices. You shouldn't need it if you make sure that your frame, engine, and body are well grounded.

2) Waytek, Newark Electronics, Allied Electronics, and even Radio Shack should have something suitable. Why in the world do you want to switch power to your radio? Why make the electrical system more complicated than it needs to be?

3) Doesn't Mobi-Arc want an arm and a leg (and possibly first born child) for their isolator? Last I recall, that thing was way over-priced. Just my opinion.


Thank you!

2) This is my wife's truck. there is no doubt she will forget to switch off the radio every time, if it is on a permanent circuit, like the aux battery. So, most of the time it will be on the main and ignition controlled circuit. But when camping, I want to be able to listen without draining the starting circuit.
Does this make sense? I am open to other suggestions...
I agree that complicating things is not ideal.

3) Yes, it is expensive. Here's why I went with that unit: I thoroughly researched the other systems, and decided that they are not great. The painless system is known to fail, and I can't accept that. The hellroaring is really badly built. to run everything off the main circuit and only use the aux in case the main completely drains, just means this: don't tax our device, it can't handle permanent loads.
a non isolated switch is not an option either.
Also, I went down to the factory, where mobi arc makes them. they demonstrated the device with 200 amps of permanent load, measured voltage loss, directionality, and convinced me. It is a bulletproof design, and extremely well built.
finally, you get a cruiser-price ;)

thanks,
Jan
 
It takes a fairly long time for a standard radio/stereo to drain a well-charged battery (granted, this isn't true if you have a boombox on wheels). If ignition-controlled, you'd have to leave your keys in the truck and ignition on a long time to drain the starting battery. How often do you really think you will forget to pull the keys out of the truck when you call it a night or leave your truck alone for any length of time? You already plan to have an aux battery. For the number of times that I might forget to turn off the radio at night, I could live with a pair of jumper cables and that aux battery. I might forget to pull the keys once, but I'd remember it from that point on. There's nothing wrong with your switched radio idea, but it just doesn't seem necessary to me. JMO :)


2) This is my wife's truck. there is no doubt she will forget to switch off the radio every time, if it is on a permanent circuit, like the aux battery. So, most of the time it will be on the main and ignition controlled circuit. But when camping, I want to be able to listen without draining the starting circuit.
Does this make sense? I am open to other suggestions...
 
Back
Top Bottom