dukebluerog, your 72FJ40 still for sale? If so, can you give me some details on the cruiser?
For Sale / Wanted To Buy (3 Viewers)
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hey Squeeler (Chuck) - I pulled the window crank assembly out last night before Chad picked up the 60 carcass. Let me know if you want to ship it, wait till Jim comes up again, or just find another...
Sitting over at Jim's - he's telling some great stories about your adventures on Schoolbus. Sounds like everybody had a blast.
Sitting over at Jim's - he's telling some great stories about your adventures on Schoolbus. Sounds like everybody had a blast.
samuridave...FJ still available...send me your email address and I can send more pics and info...email me with questions at dukebluerog@carolina.rr.com
...thanks for your interest...
...thanks for your interest...
Any luck with that front cv shaft?
OK here are some pics of the parts 60.
(Cruise control system seems to be all there, I will check it more in the next few days or sooner if anyones interested in anything.)
I will try to get some exterior pics later, its in my garage so there isnt alot of room for pics.
SOLD
I also have a spare Lockright, thought I would use it in my front, but I dont wanna mess with having a locker up front for now. (Other things are more of a priority.) This will fit all fine spline LC's.
I would like to get $150 for it. I am missing 1 pin. Everything else is there. (You can get new springs and pins from Cruiser Outfitters for $16 or see if you can get them from the plant. (Its in the upstate.) SOLD
(Cruise control system seems to be all there, I will check it more in the next few days or sooner if anyones interested in anything.)
I will try to get some exterior pics later, its in my garage so there isnt alot of room for pics.
SOLD
I also have a spare Lockright, thought I would use it in my front, but I dont wanna mess with having a locker up front for now. (Other things are more of a priority.) This will fit all fine spline LC's.
I would like to get $150 for it. I am missing 1 pin. Everything else is there. (You can get new springs and pins from Cruiser Outfitters for $16 or see if you can get them from the plant. (Its in the upstate.) SOLD
Last edited:
Lock Right SOLD! 
jfz80
Cruisin’
jfz80
Cruisin’
1999 toyota tacoma (in sig line)
available in stock form or with some/all modifications
all mods either new in box or just recently installed
the good- well maintained great running truck
the bad- hit and run damage on back drivers side of bed ($1000)
99 SR5 4x4 2.7 5 spd. 110k miles
-new steering rack
-new poly bushing kit
-arb front bumper
-mobile 1 in everything since 30k
-new lower ball joints
-120k service in a box waiting
-31x10.5 yokohama geolanders (i like alot!!!) less than 10k
accessories
-Donahoe coilovers (installed for 3k miles)
-Deaver custom 8-pack leaf set
-bilstien 5100's
-roger brown 2'' body lift
Truck as is: truck, ARB, camper shell, tow hitch $7500
Truck w/ all mods: $9000
Mods: Donahoe, deaver, bilsteins, BL $1500
pm any ?'s or offers please
Jason
(winch not for sale)
available in stock form or with some/all modifications
all mods either new in box or just recently installed
the good- well maintained great running truck
the bad- hit and run damage on back drivers side of bed ($1000)
99 SR5 4x4 2.7 5 spd. 110k miles
-new steering rack
-new poly bushing kit
-arb front bumper
-mobile 1 in everything since 30k
-new lower ball joints
-120k service in a box waiting
-31x10.5 yokohama geolanders (i like alot!!!) less than 10k
accessories
-Donahoe coilovers (installed for 3k miles)
-Deaver custom 8-pack leaf set
-bilstien 5100's
-roger brown 2'' body lift
Truck as is: truck, ARB, camper shell, tow hitch $7500
Truck w/ all mods: $9000
Mods: Donahoe, deaver, bilsteins, BL $1500
pm any ?'s or offers please
Jason
(winch not for sale)
No radiator sorry.
Last edited:
Having seen and ridden with this Taco before, I can vouch for its capability and condition. Very nice rig!!
Guess you decided to finally bite the bullet and list her. I am trying to do the same with my 80 and 100.
Good luck with the sale!!
Yeah Bill it was a hell of a trip...would do it again in a heartbeat...Capt is a hell of a driver. Yeah you can ship me the crank, thanks for takin it out. Let me know what ya want for it.
Matt I'll take the two outside air vents...the one's that close.
How much are you askin for the cruise control?
Thanks
Matt I'll take the two outside air vents...the one's that close.
How much are you askin for the cruise control?
Thanks
I was thinking $20 plus ride - but will take less if you think it's not worth that, within reason for my time. PM me your address and I'll get it out...
Outer vents are gone already.
Cruise control seems to all be there. I need to look at it closer next week [just to make sure it is complete]. (After my Cullowhee trip) I was hoping to get $100 for it.
(I bought a CC system for my 62 a year or so ago for that and I thought it was wair. To be honest this one looks more factory than the dealer option one I have yet to install.)
Let me know of anything else as well and I can bring it to Cullowhee
Cruise control seems to all be there. I need to look at it closer next week [just to make sure it is complete]. (After my Cullowhee trip) I was hoping to get $100 for it.
(I bought a CC system for my 62 a year or so ago for that and I thought it was wair. To be honest this one looks more factory than the dealer option one I have yet to install.)
Let me know of anything else as well and I can bring it to Cullowhee
Bill:
In all the BS I got caught up with these last couple of days I forgot to thank you for the BFG's.
They are great and in better shape than you stated. Delivered and carried into my 62 by a Floridian feller.
In all the BS I got caught up with these last couple of days I forgot to thank you for the BFG's.
They are great and in better shape than you stated. Delivered and carried into my 62 by a Floridian feller.
EDITED: THE 60 IS GONE
Still have a mint condition hood and a few odds and ends...
Jim and I just picked up a parts FJ60 this morning from a fellow South Florida Cruiserhead. I took the whole thing just to get a pair of FJ60 knuckles, parting out the rest - SC folk get a special price...
Has been partially stripped, but the following is up for grabs.
Like new set of 31 x 10.50 BFG KO's on black wagon wheels - $400 obo (very negotiable)
Good hood.
Jim says the front bumper looks good.
All glass - I don't want to strip any of this - so the value is in my labor unless you can convince Jim to do it for youHe says
NO.
Rear upper hatch looks pretty decent - some rust around lock cylinder.
Rear hatch rams are good.
Front and rear axles, birfs, shafts, 3rds, etc.
Disc brake parts - mc and booster
Cylinder head, intake, or exhaust (front of engine stripped)
Drive shafts.
Front fenders have rust at mudflaps - but the rest is really nice, straight and would be easily fixed.
Transmission and transfer case.
Can't vouch for condition of anything
Dashpad (grey) and center console look good - althought I've never taken one off?
JIm is going to the MLK run at Tellico - that's the only way any of this is deliverable (for usual Corona fee).
Let me know if you need anything else.
Stoked it worked for ya - the delivery boy said you were super happy. The guy that got the dash pad was esctatic!!! Didn't know you 60/62 drivers were so serious ;p .
- the delivery boy said you were super happy. The guy that got the dash pad was esctatic!!! Didn't know you 60/62 drivers were so serious ;p .Bill:
In all the BS I got caught up with these last couple of days I forgot to thank you for the BFG's.
They are great and in better shape than you stated. Delivered and carried into my 62 by a Floridian feller.
I forgot to ask if you still have the OEM radio?
Stoked it worked for ya
Yup. Didn't verify if it worked or not - but it looks good. Jim told me to post it on e-Bay as all the purists would go ga-ga over it. Make an offer if you want it - keeps it simple for me .
Funny thing is - Brett down here had one new in the box that he sold on e-Bay - now that went for a fortune - kinda like seeing folks buy OEM hub caps on e-Bay for more than Toyota sells em new for...
.Funny thing is - Brett down here had one new in the box that he sold on e-Bay - now that went for a fortune - kinda like seeing folks buy OEM hub caps on e-Bay for more than Toyota sells em new for...
