fj60 parts, gas tank, carb, fenders

[zucruisers]

i have a usable fj60 gas tank, came out of an 87, bottom has almost no rust, top side has some rust but still seems solid, comes with filler neck tube too, $50, no shipping

carb off the same 87, unknown cond., would be good if you want to rebuild it, $50 - SOLD

front fenders, pass side is dented, driver side if pretty straight, not much rust, $50 for both, no shipping

air filter housing, in pretty good condition, $40 + shipping from 17857

rear axle, complete minus the third member, brakes and parking brake cable are all there, $100 pickup only

four red 87 fj60 doors, thought i had these sold, the pass side are dented/scraped, almost all rust free, good glass, $100 obo, pickup only

all parts located in northumberland, pa, i can get pics of any of them if needed, i have a few more things i'll be adding soon

 

[zucruisers]

i also have a pair of front springs(from the same 87 fj60), in decent shape, some surface rust but nothing major, $60 for the pair

 

[bunja]

Would you happen to have the drivers rear bumper endcap?

Thanks
Ben

 

[zucruisers]

Would you happen to have the drivers rear bumper endcap?

Thanks
Ben

no, and please do not ask if i have any other parts, what i have listed is whats for sale, i dont really have many other fj60 parts, and the ones that i will sell, i will list for sale

 

[DirtyRice Joe]

If you don't get any response on the whole tank, I need a fuel tank sending unit if yours is available and working.

Thanks,
JR

 

[zucruisers]

If you don't get any response on the whole tank, I need a fuel tank sending unit if yours is available and working.

Thanks,
JR

i dont know whether the sending unit works or not, the truck it came out of never ran since i had it, i'd rather not sell it separate though, sorry

 

[zucruisers]

rear axle added to original post, carb is sold as soon as i get the $

 

[zucruisers]

carb is sold, the rest of this stuff needs to go

 

[aball]

Do you have any knuckles?
Aaron

 

[zucruisers]

Do you have any knuckles?
Aaron

no.

 

[zucruisers]

added fj60 doors to the original post, this stuff needs to go!

 

[zucruisers]

i also have the engine shortblock to get rid of, 87 2f, with clutch, bellhousing, distributor and a few other parts still attached to it, make offer on whole thing or parts

if nobody wants this stuff soon its going to the scrap yard next time i make a trip there, so make offers, it needs to go!

 

[GLTHFJ60]

Can you send me some pictures of the doors, specifically the bottom rear edge?

 

[zucruisers]

Can you send me some pictures of the doors, specifically the bottom rear edge?

pm sent

 

[Dirty Toad]

will you sell me the parking brake cable assembly? I don't need all that other stuff, but the parking brake cable assembly would be helpful as mine is totally messed up (main cable frayed inside of sleeve and will not move at all.)

 

[zucruisers]

will you sell me the parking brake cable assembly? I don't need all that other stuff, but the parking brake cable assembly would be helpful as mine is totally messed up (main cable frayed inside of sleeve and will not move at all.)

sure, let me know what exactly you need and i'll see if its in good shape

 

[Dirty Toad]

sure, let me know what exactly you need and i'll see if its in good shape

If you disconnect the parking brake cable from the handle, tas well as the left and right side brake drums you will be holding what I need.

The whole thang brother! It is my main brake cable that is frozen, but I have been looking at the assembly and can not see how you would take it apart. So there you have it.

What do you want for it?

I need to get my hands on it before Moab, if yours is in working order.

 

[SKINNER]

Can I get a pic of the passenger side fender? Is it just the outer skin or do you also have the inner wheel well?

 

[zucruisers]

If you disconnect the parking brake cable from the handle, tas well as the left and right side brake drums you will be holding what I need.

The whole thang brother! It is my main brake cable that is frozen, but I have been looking at the assembly and can not see how you would take it apart. So there you have it.

What do you want for it?

I need to get my hands on it before Moab, if yours is in working order.

i'll pull it tomorrow after work if i have time, and i'll let ya know a price after i pull it and can make sure its in good shape

Can I get a pic of the passenger side fender? Is it just the outer skin or do you also have the inner wheel well?

i'll get a pic tomorrow, the inner wheel well is not attached