Recent content by WMaher

Thanks for all the info, and yes the seats will be on a ACC circuit as I also am worried about leaving them on. As far as what your recommending, are you suggesting a different wiring method then what I mentioned in my original post? As in if I supply power to B and BW and cross R and Br the...

Havnt done any more testing with switching grounds or anything yet, but I did measure resistance from several points, Ill attach some of the pics below. Drivers Seat: Black and White wire with nothing crossed- 7.12 ohms Black and White wire with Red and Brown crossed- 0 ohms White and Brown...

So you’re saying I need to run the ground from my switches to a common ground on the wiring harness of the seat? Instead of just a body ground?

Sorry for cropping it, I attached the PDF of the seat heater, I haven’t measured resistance or ohms of the switch but I will tonight. From my understanding yes I have the element, every GX came with heated seats and I have verified wires that run into the actual seat cushion themselves that...

LOOKING FOR HELP WITH HEATED SEAT WIRING Some background, trying to install GX 470 seats into my 1993 Toyota LandCruiser, I have every single function of the seats to work besides the heated seats(slide/lumbar/tilt/ect). I have the wiring diagrams for the GX and I will be running separate...

Looking for 2 small wiring harnesses, one for the front lower turn signal, and one for the front corner lamp, Im looking for the part that goes directly to the lamps, including the bulb socket. Part numbers and descriptions are below, I would need shipping to 52405 1. COAD, FRONT TURN SIGNAL...

Looking for 2 small wiring harnesses, one for the front lower turn signal, and one for the front corner lamp, Im looking for the part that goes directly to the lamps, including the bulb socket. Part numbers and descriptions are below, I would need shipping to 52405 1. COAD, FRONT TURN SIGNAL...

Looking for 2 small wiring harnesses, one for the front lower turn signal, and one for the front corner lamp, Im looking for the part that goes directly to the lamps, including the bulb socket. Part numbers and descriptions are below, I would need shipping to 52405 1. COAD, FRONT TURN SIGNAL...

2002 LX 470 317k miles. Looking for help identifying engine noise, I believe it might be loose spark plugs but I can't tell for sure and would like some input before proceeding. Recently purchased this, has a pretty solid maintenance record up until 250k miles or so. Engine ticks on cold start...

Messaged you

Stock Interiors/Factory Interiors/ACC from what I can tell all sell the same product, and their cheapest full set cost about 480$ with shipping, I'm sure its good stuff but I am looking to spend less. Also I don't think those kits come with any clips/clipping, so if I just bought used OEM it'd...

Looking for grey carpet for my 1993 FZJ80, would prefer a whole set (front + cargo + wheel arches) but willing to settle for just the front passenger area. Not too picky on condition, as long as it doesnt smell like smoke/mold and can be cleaned, Ill take it. Located in Cedar Rapids, IA 52405...

Carpet still available? If so what is the condition? Trashed? Okay? Would also need shipping to 52405. Thanks