Recent content by WarWagonFJ80

  1. W

    Cruiser starts, but won't stay running

    At this point, my only options are a bad ecu or compression loss in a cylinder right?
  2. W

    Cruiser starts, but won't stay running

    Got the fusible link figured out and replaced with new Installed new factory spec battery NO CHANGE.
  3. W

    Cruiser starts, but won't stay running

    Now that you mention it, I have heard of that being an issue on different vehicles. I'll swap with a new battery and see if it helps... Hey Jon, essentially what I'm asking is, when looking at the junction box for the fusible link, what is the source wire that gets bolted to the larger post...
  4. W

    Cruiser starts, but won't stay running

    Thank you Jon! To be honest, I'm not to keen on how to read that diagram. I can't find either wire that is supposed to be on the larger post of the fusible link. Where is it supposed to source/connect from specifically?
  5. W

    Cruiser starts, but won't stay running

    New Distributor is in. No change... Vacuum lines are all good that I can find. Double checked my fusible link today as well...this doesn't look normal. I'm missing the entire third wire. I know I can order one from Wits End, but does anyone have a picture or explanation of where the missing...
  6. W

    Cruiser starts, but won't stay running

    George, good call on that. I did not have it mounted last time, just plugged in. I went back and plugged/mounted the new igniter with no improvement. Another symptom presented itself in this most recent attempt: the tach died out. I restarted the truck and it jumped back to life, but that seems...
  7. W

    Cruiser starts, but won't stay running

    Thank you Jon. I will adjust the plugs and get a distributor on order. Additional note: I swapped the ignitor for a brand new one and it wouldn't even fire. Plugged the old ignitor up and fired & went back to her normal, stuttering/stalling self.
  8. W

    Cruiser starts, but won't stay running

    New intake pieces came in. Installed them...no change.
  9. W

    Cruiser starts, but won't stay running

    Yeah that makes sense to me for sure. I guess I just didnt realize how LARGE of an issue it could be. I tried rigging up a seal, to no avail. The PO buggered this intake up pretty good. I'll have to snap a pic today and post it for you to see. Yessir, air filter was replaced and is in good...
  10. W

    Cruiser starts, but won't stay running

    Hahaha! Thanks for the welcome!! Which grounds should I be looking at...any of the ones connecting to the fender/firewall? As for listening to injectors, I cant do that as the truck doesn't stay running for any decent amount of time. Can't be the filter, as I pulled the output line & engaged...
  11. W

    Cruiser starts, but won't stay running

    Just picked up a '91 Cruiser with around 168k on the odometer. Ran sluggish, but smooth when I bought it. Took it on one trip that lasted about an hour and it sounded like it dropped a cylinder. Limped her home (she runs if I keep the idle up, albeit she runs crappy). If I start her up, she'll...
Back
Top Bottom