Cable is located @ middle of the fire wall over #6 piston
Top up coolant reservoir and check for leaks
Do you have a rear heater? Check the piping over chassis below the passenger seat area, mine corroded here and surprised me
Just a quick update
After the head job, I checked the valve clearances
It should be 0.25-0.35mm on the exhaust side
I have 0.70 on average, closest is 0.60mm, worst is 0.80mm !!!
No idea how they managed a f@ck up like this at a well reputed machine shop but they will have a bad Monday for...
I am struggling to find the right instructions on how to test the MAF and the wiring on the FZJ80
Could you give me some recommendations please?
I would like understand and rule out that this is 100% ok since this is one of the most important reading that the ECM uses for AFR
Hi, havent had time to do any testing in the past days
It looks like the machine shop messed up something with the valve clearances
The valves are ticking very loudly, I would say it is louder then the diesel
I dont think the hardened valve seats making the noise, what do you think?
Anyways I...
Yes injectors connections are all ok
I will do a test drive like that and will upload the readings
Oil cap good
Spark plug tube seals replaced
PCV valve, hose, grommet new
Vacuum booster check valve ok as per FSM, not sure how to test the brake booster itself but will look into it
EGR fine and...
Thanks for the quick replies :)
We just finished the head gasket job yesterday, it was suspected after the blue liquid turned yellow like in the Scotty Kilmer test(strange he was using an FZJ80 demonstrating the test)
Anyways the car is back together and there is no change in performance... it...
I missed this from my list :)
I has been replaced 2times with different makes
Last one is a Denso
Strange thing is I dont fell difference in performance with a disconnected sensor
Fuel pump hasnt been replaced and fuel pressure not checked
Reason why is that the car had LPG system fitted and it did not make any difference if I was running on petrol or LPG
The system is now removed like it was never fitted, engine wiring harness replaced( just in case if there was a bad...
Hello from Hungary
This is my first post I hope you find it interesting and I am desperate to get help with this issue
I am going to twist your minds here :)
Ive been reading posts from this site in the past 5 years since I own my 80
This is a very informative site and it helped me a lot to...