Recent content by toosdaejb

That looks great. I assume it would work in my current wiring set up with the 4 wires for ground , high, low and tail lights?

No high beam or low beam at this point. Lights are newer, can’t find any wire glitches, yet. Thanks for the response

Hi folks, I am looking for a replacment for a failed older headlight switch, complete with 10 amp fuse (attached). I did try to clean the old one up, but no lights. Where can I find a replacment or newer tech that will hook into my existing wiring. Grateful for any guidance. 1965 FJ

Completely agree with the old school operation in a new school world.

Great feedback. I’ve got 2 lines into the transfer case, so 2WD and 4WD are set up. I’ll lock the hubs and try it out.

Grateful for the input!

😎

Greetings, I have a custom vacuum switch in my 65FJ( photo). Yes it’s very old school. The Vacuum hoses are attached to the transfer case under the FJ. I believe the vacuum system is functional. I’ve never operated a vacuum and want to know how it works. toggle left, 2WD - Toggle right 4WD...

Exactly right Firemedic831! I found the diagram. Many thanks

Very grateful for the insights. Definitely non-stock. I don’t have dual tanks. I’m wondering if it’s some type of older fuel injection valve.

Thanks for the help here. The two hoses have “fuel injection” printed on them and both attach to lines Are shown in the pix taken under the FJ

Hi folks, I have a 65 FJ 40 with the heater removed. I have this valve and attached hoses Under the center of the dash. Can anyone identify and explain how this works? I want to install a heater and assume this valve and hoses will be part of the project. Grateful for any guidance here. JB

Hi folks, I have a 65 FJ 40 with no heater. I have this valve and attached hoses. Can anyone identify and explain how this works. I want to instal a heater and assume this valve and hoses will be part of the project.

Excellent information , thanks. I look forward to another 100K in my 65 FJ40