Recent content by steezedae

My valve cover is missing the part on the valve cover that this vent hose connects too. I just have an empty hole there on my valve cover. Anyone know where I can get that part or have one laying around? I found a pvc valve and grommet but nothing for this hose, besides the hose itself

update, still no heat adjustment, and my cable still doesnt move when i slide the climate control. Swapped in a couple ac amplifiers and climate units, still nothing.

soldered the points on the back of my climate control just to double check and nothing changed. Found a servo amplifier at a junkyard that I'm going to try and swap in soon and see if it fixes my problem

I'll check them again but I ruled them out because I tested another unit I had and it didn't fix the issue. There is a chance the potentiometer is broken on both but i doubt it. But who knows with parts this old.

Thanks for the reply, I think I've seen a couple of those threads. I'll read up on them some more. My buddy has a 94 and I think I'm gonna grab a couple parts off it and do some tests with the AC amplifier and check some relays. I'll report back what I find

Can't hear any sound when sliding the temp adjustment. Also tried swapping in another climate control I had and that didn't do anything. Is it time to pull the dash and get to that servo? Or can I remove it without fully taking out the dash?

Okay I'll check tomorrow and see if I can hear the servo motor working

any ideas?

Also, I made sure the climate control unit is set to Manual and not auto when i took it out and tested with another unit. Didn't fix my problem..

Having some issues trying to get my heat to adjust from cold to hot and vice versa. If I pop the hood, i can open and close the valve manually to obtain heat or cold, so in the summer I close it and the winter I open it, so I know the valve isn't the problem. If i disconnect that cable at both...