Recent content by rgreed

  1. R

    Brake bias issue?

    Sorry for the long delay. Summary of work back in January All new OEM rear: Rotors Calipers Pads Reset parking brake Bled system per service manual System was still maintaining slight pressure and generating heat due to pads dragging slightly on rotors. Asked several folks who do brakes...
  2. R

    HVAC issues tsb for servos. How hard to do myself?

    Toyota quoted $2200 to replace the servos in question. Looks like it is a disadvantage to have a chill/cool box when it comes to certain servo failures.
  3. R

    HVAC issues tsb for servos. How hard to do myself?

    Tried to clear might as well as 'reset' the dampers via my Autel. No success. Taking it to Toyota to have the TSB applied for the 2016-17 software update. Once that fails I'll bit the bullet and order the parts the TSB says are required for repair.
  4. R

    HVAC issues tsb for servos. How hard to do myself?

    Did you ever make any progrerss on this B1443 code? I have the same.
  5. R

    Part for servo motor that controls AC modes

    Mine is throwing a B1443. I'm hoping someone has a way to get at the servos without the full dash removal in the TSB. TSB for 2016-2017 200 Series HVAC
  6. R

    Brake bias issue?

    Stock height, no brake work. Recent tire balance and alignment, no issues following the work. I swapped to winter wheels/tires and noticed the truck pulls slight right after install which triggered the inspection. I removed the calipers and inspected the pins. Regreased, no signs of pitting...
  7. R

    Brake bias issue?

    This particular vehicle is very clean rust wise. Aside from a bit of rust forming on frame welds it is very clean. I did remove both rotors and observed the parking brake travel the other day. I did several pulls of the lever and observed the return spring on both sides after performing the...
  8. R

    Brake bias issue?

    First post. I've read brake related several threads and reviewed the service manual for the 200 Series to the best of my ability. My 2016 200 Series ~104,000 miles is dragging the rear brakes enough to generate heat while driving. The first thing that came to mind was a stuck caliper. Both...
Back
Top Bottom