Recent content by Reachej

  1. Reachej

    O2 Sensors-ODB1Read-25/26

    The sensors are on the manifold as mentioned. Interpreting the helpful data was the main question. Thanks.
  2. Reachej

    O2 Sensors-ODB1Read-25/26

    1994 FZJ80 PAIR removed-new, OEM O2 sensors installed on exhaust manifold New Cats and exhaust (could the wrong configuration throw 25/26? The guy who did it wasn't a LC specialist by any means) EGR crippled Injectors just cleaned and 1 given new core, was not firing (#6) Had been throwing code...
  3. Reachej

    93 Land Cruiser random power loss and stalling

    Maybe post a picture of the wiring harness?
  4. Reachej

    My engine is missing!!!

    What are the symptoms when driving? If there are visible cracks in the tube I'd be changing that tomorrow regardless.
  5. Reachej

    My engine is missing!!!

    Intake tube does indeed look suspect. I'd rule out vacuum leaks first since those are the easiest fixes once found. If there were oil in the spark plug tubes in theory you would have noticed that when you changed the plugs? If there was though you'd need to do the valve cover gasket and tube...
  6. Reachej

    Under Manifold Parts

    Yes I plan on doing the hoses, three way, check valves and VCV for sure. Was wondering if anyone has any insight as to the VSVs' life expectancy. I'll probably just do those too. Looks like the "Duty Vacuum Valve" and "Vacuum Valve Assembly" aren't available anyway.
  7. Reachej

    Under Manifold Parts

    OK so I have the Upper Manifold off getting the injectors cleaned. Other than all the vacuum lines and the VCV, which of this stuff under here should I be replacing while it's open. All? 1994 FZJ80
  8. Reachej

    Compression test results

    A very little bit, what does that tell me? I had done the Valve Cover gasket and plug seals maybe 6 months ago. At that time there was quite a bit of oil in the #4 cylinder.
  9. Reachej

    Compression test results

    Chasing a misfire so did a compression test on my '94 FZJ80 with 300,000+ mi. Here are the results: 6- 203 5- 183 4- 189 3- 185 2- 187 1- 185 The plug on the #6 did look like maybe it's not firing well/at all? Am I correct that this compression is ok? Do I need to do a leak down (don't have...
  10. Reachej

    How to properly clean the early VAF sensor

    I was able to resolder this recently and I'm no pro at it. I went very, very slow....
  11. Reachej

    Post-PAIR Back Pressure Test

    Seems like it. Will try on Monday, appreciate the response.
  12. Reachej

    Post-PAIR Back Pressure Test

    It is a test to verify a clogged cat. No need to obsess if you don't suspect a cat issue
  13. Reachej

    Post-PAIR Back Pressure Test

    because i want to verify that they are clogged before replacing if i can just repair a leak instead
  14. Reachej

    Post-PAIR Back Pressure Test

    I would like to back pressure test my catalytic converters. I have deleted the PAIR and installed O2 sensors there. The original O2 sensors are still there as plugs but are so rusted I'm hesitant to mess with them. Would using a back pressure test gauge at the ex-PAIR location yield meaningful...
  15. Reachej

    In love with my project 93' 80 series but its breaking my heart, bogging down on incline... fuel system issues ? any advice ?

    Have a listen at the catalytic converters, and look for soot marks at the seams nearby and around the O2 sensors. Never know.
Back
Top Bottom