Recent content by pw4Him

  1. pw4Him

    FJ25 wiper arms

    I am looking for a set of wiper arms for a 1959 FJ25 with the factory original vacuum motors. The hole in the arm needs to be tapered to accept the attachment onto the motor. Here are a few pics of the shaft of the motor. Thanks
  2. pw4Him

    1959 FJ25 wiper arm

    I am looking for a set of wiper arms for an original vacuum wiper motor on a 1959 FJ25. The hole in the arm must be tapered to be able to attach the arm to the motor. Here are several pics of the motor. Thanks.
  3. pw4Him

    1959 FJ25 wiper arm

    I am looking for a set of wiper arms for a 1959 FJ25 that has the original vacuum wiper motors. The hole in the arm needs to be tapered as to attach to the motor. Here a few pics. Thanks
  4. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    No, I am sorry. The radio works, but with much static/RF. With the truck at base idle, when I turn on the radio it kills the truck. As I stated before there is no radio suppressor on the igniter or the alt. I am about to wire the radio hot direct to the fuse block with a stand alone harness and...
  5. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    I have no connector with that set of wires in it. I have asked many people about this and no one seems to be able to help. The Toyota wiring diagram that I have is not very good/useless.
  6. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    It's the only plug in the harness that goes into the radio.
  7. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    I also don't have any suppressors on the alt and igniter. The igniter wire that goes to the distributor has been spliced very poorly.
  8. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    Just FYI the truck is a late USA market with a production date of Aug 1983.
  9. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    Here is what I have. I obtained a new a new proper plug and then spliced into the old radio harness at the power side of things.
  10. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    It's an 83 FJ40 with A/C, power brakes and steering. It has the OEM wiring harness, but the seems to be a few oddball things. I had to make a special wining harness for the radio(OEM) because the radio harness in the truck had a different plug and the speaker would not work. The engine was...
  11. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    I don't have a condenser/suppressor on the igniter. Was not able to find anything on the thread from bj40green.
  12. pw4Him

    RFI and ignition problems with radio on a 1983 FJ40

    When I turn on the OEM AM radio at idle the trucks stops running. I also have excessive RFI on the radio when the truck is running at a higher rpm off idle
Back
Top Bottom