Recent content by ProjectHoarder

  1. P

    Inconsistent power from 1HDT

    No ERG, exhaust is 3” straight through - no cat.
  2. P

    Inconsistent power from 1HDT

    No head winds. Manual. Caravan weight around 1200kgs loaded. I’ve changed the fuel filter, whilst there was a little bit of debris in there, it wasn’t by means “full” or built up. no change after the fuel filter was changed. I’ll try to look at the primer this weekend.
  3. P

    Inconsistent power from 1HDT

    Leaving Adelaide today, heading back to Bendigo tonight. Hopefully I’ll get a chance to look at it tomorrow after unpacking everything.
  4. P

    Inconsistent power from 1HDT

    Thanks for that info.. all worth looking at-especially the fuel lines. I have checked the tank, which was clean as a whistle. The cap has that suction issue, but doesn’t seem to make a difference after it’s been opened to let the air in.. actually, another thing that I noticed, was that the...
  5. P

    Inconsistent power from 1HDT

    I’ve been wanting to fit an after market fuel filter with a sight bowl for that reason-just haven’t got there yet. Seems like now would be a good time. I figured that would be the main response, but wanted to ask anyway in case someone else had another theory.
  6. P

    Inconsistent power from 1HDT

    Hi all.. I’m getting inconsistent power out of my manual 1hdt, non intercooled whilst towing a caravan through central Australia. Engine, pump and injectors have done 20k since rebuild. When we left, I struggled to maintain 90kph on flat roads. As we went on, after two days it was comfortably...
  7. P

    Engine vibration/noise at 3000rpm

    yeah, the sound is def. coming from the bell housing-can t see inside the bell housing. Awesome. well I guess it’s better than having to strip the motor again. thanks for the info guys-not sure when I’ll get to pull it out-im Not exactly chewing at the bit to work on it again.
  8. P

    Engine vibration/noise at 3000rpm

    I can hear it in the cabin at idle. when I lightly touch the pedal (about 10mm from the top) it ‘goes away’. Didn’t get a chance to have a closer look yesterday with the kids-hopefully today. Do you know what causes the ‘chirping’?-it only does it when I get the louder vibration at 3000rpm, as...
  9. P

    Engine vibration/noise at 3000rpm

    can you see much through the clutch arm hole in the bell housing? might be able to see or hear something through that?
  10. P

    Engine vibration/noise at 3000rpm

    yeah, I’ll check it out today. well, I guess you either laugh or you cry right?!
  11. P

    Engine vibration/noise at 3000rpm

    I have noticed a very slight squeal at idle, that goes away when I push the clutch in. I’ve heard it on other cars I’ve owned(usually with old clutches) so didn’t think of it as ‘out of the norm’-figuring it was the thrust bearing So, is this a bad bearing? Or a bearing that doesn’t have enough...
  12. P

    Engine vibration/noise at 3000rpm

    On the road- goes away as soon as the clutch is pressed in. I should probably free rev it to 3200rpm to see if there’s a difference Yeah, I dumped the break in oil at 550kms-gonna drop the new oil tomorrow and check it out. Might even send it off for testing. I wanted to check the oil in the...
  13. P

    Engine vibration/noise at 3000rpm

    It’s a sealed roller bearing that came with the Exedy kit. And yeah, definitely replaced the old one with the new one. It does fit in theory-though I can’t see myself pulling the engine or gearbox out to replace a pilot bearing. I suppose it could “wear in”, have you seen that happen?
  14. P

    Engine vibration/noise at 3000rpm

    Hi all, I recently rebuilt my 1hdt, after a BEB failure, man what an epic undertaking that was ! Anyway, I bought the parts from Engines Australia, as they had genuine Toyota parts (including pistons), and they were great! Pretty much went all out on the rebuilt, new oil cooler, new oil pump...
  15. P

    1hdt failure

    Thanks for the direction. Looks like I’ll go with SMS Diesel components. Still, not a cheap exercise, no matter which way you go. I took the pump to my local injector specialist-he’s sure it hasn’t been rebuilt. Over 400k for a pump is alright. So that and the injectors will get a go over, and...
Back
Top Bottom