Recent content by Phallen

I haven't experienced any issues since. The bad wiring was the definite culprit for the issue. I believe I listed the part numbers previously in the post. I’m at work but once I get off I double check

(The photo was from the first post and I’m using it as a reference) In the photo, the end of the rod is flush with the plastic arm. In my LC, I’ve found that the plastic arm in the photo sits higher on the metal rod, exposing the flat side at the end of the rod. Anyone know if the...

Reviving an old issue. I’ve been playing around with the HVAC this past week. I’ve found the metal arm that sits on top of the blend door actuator doesn’t fully articulate to max hot and max cold without a gentle nudge. The ”metal arm” does move on its own but it can go past the Max Hot and...

I picked up the Sylvania Headlight Restoration Kit a few days ago after watching Project Farm’s video here I applied the kit today in about an hour. Very easy to follow instructions and great results.

By chance, did you get the exhaust manifold swapped out? If so, what was the cost?

I replaced the sensor and am still experiencing the problem. I think the next move would be to replace the air mix servo, which is going to be long process. I’ll have to set some days to the side to pull apart the dash. 🤷‍♂️

I did. I’m going to replace sensor since they’re $22 a piece. While I wait for delivery, I’m going to attempt to clean the plug and the tube to see if that changes anything

Update This morning, the heat was blowing out cool air (same temp as outside). Not sure what changed from yesterday morning and this morning.

update: Two days ago, i saw water drops leaking from one of the exhaust gaskets between one of the cats and the muffler. I realized I missed replacing that one and quickly remedied it. Now I’ve noticed ticking sounds a quieter but is still there. I drove around the block with my head...

This morning, when I started the cruiser to take the kids to school, the heat started working, which was somewhat pleasant. The issue now is the heater blows out extremely hot air. When I adjust the temperature setting when the HVAC is set to Auto, the fan speed changes but not the air...

Thanks, Biga. Is anyone with a functional servo able to see if their’s moves as much as mine?

I’ve always had an HVAC issue with the LC but it has been low on the priority list. The heat will periodically work and then stop. The AC does not work, no Freon due to a leak in the system Right now, it blows the same temperature air as outside. I’ve been playing around with it off and on...

I agree. I found a cat back exhaust system through UPSW. Seems decent.

Update: I just had a local exhaust shop take a look at the Cruiser. They said the Y-pipe between the rear muffler and the catalytic converters was cracked and quoted me $793.38 to replace. They further said the muffler (their part no. 279-773) would not be available for a week or two. This...

It definitely gets louder under load and with the windows down, you can really hear the ticking while driving next to other cars, barriers, or any other large object. It looks like it is pointing towards the headers or the manifold. 🤦‍♂️