Recent content by PeeZed

  1. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Big day today…starting to get some paint on things! Custom trays installed and we’ll see how much adapting is needed when we get to airbox and battery stuff.
  2. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    The kid is gonna drive it as is with the tail overhanging and see how disruptive it is for the types of situations he find himself in. A Bob definitely makes sense if he was doing more rock crawling and could be done without having to modify engineering, but what you’re saying is extending the...
  3. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    We figured out how to get it inside the shop…just had to lower it a little bit 🤣. Also, we’re on the lookout for 60 Series: - Air intake box and tube - shifter boot/s - fuel tank sending unit. - steering column - 4wd push button (1985 thing I believe). Hood scoop and battery boxes are...
  4. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Aaaaaaaaaaaaaand the kid sold his dirtbike so now he’s gonna purchase the turbo kit that the PO of the LC was going to use but went a different route, so the kid can afford to spend some money to wake the 3B up a little bit. All opinions around this installation and setup are welcome and...
  5. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    @seapotato, it’s almost as if you were reading our minds… Also, we snagged an already built flatdeck for the rig that was on a Yota Pickup previously. We’re also cutting out in front of the rad to make room for the 8274 Warn…it’s a bit large and we didn’t want to stick way out and destroy the...
  6. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Hood cut and 2nd hood cut and placed. Thinking we’ll add a 1” wide by 1/8” thick “edge” along the top edge front to back for two reasons. One, it’ll hide the funny gap that exists because two hoods are cut at two different spots, and second it’ll act as a great spot to weld things like branch...
  7. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Baby steps on the front clip. We’re thinking adding an angled piece (kinda like a fender flare) between the body fender and the square fender where they meet to give it some shape and to hide a bunch of nonsense 🫣🥳🤣 Next will be cutting the hood in half and extending that…then new dual...
  8. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Front clip inner lengthening pieces are in. Now to design a new front quarter panel that will incorporate the new square fender.
  9. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Got the rad support built and welded up. Also starting to see how the fark the front clip is gonna actually come together…🫣🤦🤷🏼🥳
  10. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Playing with the front clip and seeing what OEM pieces will fit and whether they should go back on. Building rad support next…
  11. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Just did a “cleanup 2nd coat” with the HVLP and that’s where it’s at my friends. The Shuntz gun for inside frame rails with the long flexible extension wand thingy was necessary, but probably better with a thicker product because it puked out so much product that I cried a little when I saw it...
  12. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Paint on underside of body and RP342 on frame. Sooooo…RP342 is the consistency of water…really glad we put tarps down first! I’ve got some other wax based “ProForm” product from Lordco leftover and it is WAY thicker consistency than RP342. Regardless, the frame is coated inside and out and...
  13. PeeZed

    Sweet 16 Project: Pickup body meets 60 chassis.

    Body off to prep undercarriage and power wash (with venturi sandblasting) the frame before giving it the RP342 business.
Back
Top Bottom