Recent content by newbie80matt

  1. N

    Replaced my distributor o ring and now truck won't idle

    Guys, thanks so much for the assistance...with your help, the FSM and a timing light got the groove aligned on the distributor after turned to TDC and reinstalled. I'm now nicely bumping right at the factory spec of 3 degrees and I love how smooth and quiet she is. Thanks again Mud friends!
  2. N

    Replaced my distributor o ring and now truck won't idle

    Kaveeks, I've noticed that too, and if it was just a low or erratic idle I'd give it a little road time to re-learn but its dying out every time I start it, so that's not just the ECU.
  3. N

    Replaced my distributor o ring and now truck won't idle

    This idea ^ is awesome, definitely doing that. Will get a timing light and give it a go...one last (hopefully) question, if I'm off a tooth or so do I pull the distributor again or not needed if I'm adjusting the timing? Thanks to everyone for chiming in so far. I was so proud of myself for...
  4. N

    Replaced my distributor o ring and now truck won't idle

    Thanks for replying Tools...i did not...feel like a total newb, thought that the rotor being same or very close position would work, but could have moved the gear when I was cleaning it. If I get a timing light, is the procedure straightforward?
  5. N

    Replaced my distributor o ring and now truck won't idle

    Hi guys, my first thread writing into Mud. I bought a 95 Cruiser in March, and spent the last 3 months baselining a truck that was obviously neglected. Has 226k on the clock, and after reading a bunch of forum posts, decided to tackle a new alternator, all 3 oem belts, new idler pulley and...
Back
Top Bottom