I get no ABS or CDL lights flash on the dash when ignition is turned on
If you bridge the shown switch connector plug with a paper clip you should get the ABS and CDL lights displayed on the dash.
This confirms that part of the circuit works.
But in my case (I have no CDL switch but factory...
Sorry should of said turning circle felt no different.
H and L range is working you can definitely feel and hear the difference.
I will jack the car up and spin the wheels to confirm if the CDL is working.
But not hearing the relay I suspect not
I can see 3 plugs on the TC.
Aft end of the TC looking fwd there is a plug at 1 o'clock pull the plug and bridge it and the 'A/T P' light comes on indicating that the TC is in neutral.
There is another plug next to this at the 2 o'clock position I bridge this and nothing happens ? It does...
With L engaged I drove around in a dirt car park left n right and figure 8s.
Still didn't help and did not feel like the centre was locked.
Felt no different then in H with CDL disengaged.
I'm thinking I would of felt the difference if the CDL was working
No CDL light or ABS light in L range
Hi all
I just bought this beautiful restored 93 HDJ80R Sahara with the 1HDT engine.
It's full time AWD but hasn't been in L for about 5 years.
It has ABS brakes and no CDL switch.
When I turn the ignition on I got no CDL or ABS lights on the dash at all...