Recent content by MrA

  1. M

    Brake Master ...... Overdue write-up.

    It's been 2 days since I cleared the code and nothing has come back yet. So? When I was clearing it, I noticed these other 3 codes as well: C1223 ABS Control System Malfunction C1268 L4 Signal Pickup C1340 Open Circuit in Center Differential Lock Signal (During Center Differential Lock ON) But...
  2. M

    Brake Master ...... Overdue write-up.

    Hey, wondering if anyone can help point me in the right direction on a code I got. Recently hooked up Techstream for the firs time and discovered a "C1256 ACCumulator Low Pressure". After some searching I discovered this thread and saw a few test I could run. I timed the motor with key turned to...
  3. M

    ABS/VSC error codes C1223, C1256, C1268, C1340

    Updated with more info
  4. M

    ABS/VSC error codes C1223, C1256, C1268, C1340

    I have a 2001 LX470 with 208K miles on it. Haven't had any apparent issues, but I recently got Techstream to work on my AHC, decided to check out the rest of the vehicle with it, found the following codes under ABS: C1223 ABS Control System Malfunction C1256 ACCumulator Low Pressure C1268 L4...
  5. M

    AHC Sensor Lift -- Need Help Figuring out What I Broke

    I bough Toyota OEM: 89405-60012 (Front Right) 89406-60022 (Front Left)
  6. M

    AHC Sensor Lift -- Need Help Figuring out What I Broke

    I replaced one of my front height control sensors this weekend. Pretty easy job, didn't even take the wheel off. Got mine from Partsouq.com and paid $231 for the left side.
  7. M

    AHC error code C1712

    Swapped out the Front Left Height Control sensor (part #89406-60022) and the error codes seems to be gone. Also, the AHC moves up and down much faster.
  8. M

    AHC error code C1712

    Here's my techstream right after turning the car on: And here it is after cycling the AHC from L to N: Can anyone confirm that I should be looking to replace my Front Left Height Control Sensor?
  9. M

    AHC error code C1712

    According to this thread, it appears my Front Left Height Sensor is bad. Then I found this thread which lists the part numbers for the Height Sensors: https://forum.ih8mud.com/threads/height-control-sensor.1306616/post-14851883 There seems to be quite a lot of info contained within that thread...
  10. M

    AHC error code C1712

    Hey all, Connected Techstream to my 2001 LX for the first time yesterday in preparation for refreshing my AHC. The original plan was to replace all the globes, new fluid, etc. When I navigated to the AHC menu, I found this code: C1712 Front Height Control Sensor LH Circuit Malfunction. Can...
  11. M

    Multiple Rack and Pinions replaced

    Hey all, Got a 2001 Lx470 with about 203K miles on it. Recently had the steering rack and pinion replaced by my local shop. This morning, I was looking through the carfax report and noticed at 146K miles the previous owner had also had the rack and pinion replaced. My question is: is it normal...
  12. M

    Tips on installing rear quarter window weather seal

    Did you install new sealant on your own? I was quite surprise when I started peeling off the strip after the test fit. At first I thought I'd done a poor job cleaning, but it was everywhere again.
  13. M

    Tips on installing rear quarter window weather seal

    Did your weatherstrip come with any sealant preinstalled? I took off my old weatherstrip, spent a long time cleaning it, test fit the new weatherstrip and when I went to take it off, it was already nearly stuck again with sealant that had been preinstalled. It was a little unexpected.
  14. M

    Tips on installing rear quarter window weather seal

    Do you remember what 3M sealant worked the 2nd time? Was it 03602 Black sealant or something else? Many thanks for the replies. Doing this exact repair myself this weekend.
  15. M

    Tips on installing rear quarter window weather seal

    Hey, whats the part number for the passenger side weather seal? I'm having an identical issue of water pools in one of the 3rd row seat brackets. Replaced with belt molding, but now I notice it coming under the weather seal.
Back
Top Bottom