Here’s my RCI angled w/ kickout, no top plate. I still need to trim the plastic piece that goes between the slider and body.
All my doors open fine and after a few months i have no complaints! Ordered mine from RoofTopOverland
Main reason I went with these is because of the ramp design at the...
Yeah me too! I figured they were close enough and most of the suspension parts are the same so it should all fit nicely. I did reach out to Rago and they’re now selling GX460 marked ones on their site. As for the FCP shocks i cannot say for sure but you should try it!
I also forgot to mention that while playing around at a local 4x4 park (Carnegie SVRA), i went through the frame twister obstacle and hit my rear lower shock mount pretty hard, luckily it wasnt too damaged and so I picked up a set of Rago Fabrication 5th Gen 4runner Rear Lower Shock Gaurds!
Ive received some interest regarding the Viper cut so ill dive into that a bit more.
I have 32” tires with the Ironman4x4 Stage 2 NitroGas lift and I still rub here and there in the front. I seen people doing these “Viper Cuts” that not only look cool but gives your front tire some more...
Thank you! The drawers came fully assembled from Ironman4x4, there were a bunch of little holes about 3/8” big that i was able to fit the hook of the turn buckle into. And the other end i used a carabiner attached to the factory floor mounting points.
The hook of the turn buckle collides with...
Sorry for the late reply/update. But It has! Or at least to the eye, i havent officially measured it but i will soon!
So much has changed since the last update. Ill try and get some more details up but let me know what questions yall have and ill do my best to explain.
New stuff:
-RCI Angled...
Mini update!
Finally installed the Ironman4x4 rear poly spacer
on the passenger side. This was done to correct the 1” lean i had on the passenger side.
Prior to installing the spacer i had tried to correct the lean by opening the KDSS valves and letting it sit to equalize but after 8-10...
Thanks! The plastidip has held up pretty well but there are a few chips now due to passengers and myself being a little rough on the rear gate.
I’ve heard stories about SCS but I’m a firm believer of seeing it for myself and so far I’ve had nothing short of a great interaction with that...
Thanks! I wasn’t sure on the gold at first but it’s grown on me now.
i dont have any pics but i plan on doing an update soon on the mounts and ill post up some pics then!
Update time!
Finally got the Ironman 4x4 Nitro gas stage 2 installed. I was able to get the fronts done without removing the battery, tie rod ends and sway bars. For the rear i had to remove the rear sway bar off the axle and panhard bar for more droop.
It rides so much better now and...
Alrighty, another update!
SCS had a blemished set of gold Ray10’s that i picked up locally. I’m not nit picky about blemishes as i plan to go wheelin in dirt and rocks anyways.
I guess i got lucky because the only blemishes were very tiny specks of black paint on the gold lip which is barely...