Recent content by lespaulflame

It is a single circuit system. I will try these suggestions. I did order some kits to rebuild the MC and the wheel cylinders, and I need to get some more brake fluid. I have gone through about 3 gallons with all the bleeding activities :) I will update as soon as I receive and work on...

I did put a clamp on the rear rubber line, and I get a hard pedal. I spent all afternoon bleeding the rear brakes, but I still can't get a firm pedal. I did add Permatex to the threads. When I do let off the pedal, and there are a few bubbles returning to the master, but that is normal...

Okay, I have been working on this for many hours. I got all the wheel cylinder adjusters working correctly and even replaced the front drum shoes. I have adjusted them very tightly so the wheels barely move. Then bled the brakes 3 times so absolutely no air is present in the system. I still get...

So I was able to get an adapter to bench bleed the MC. I was able to cap it off, and I get a very firm pedal with no drop. So I believe the MC is good to go. Now I am running into other issues with the drum cylinders. I removed the drums and then contracted all the adjusters. I then have issues...

Thank you for your prompt response. I will try that with the drums. I was trying to bleed the master. I was able to get the single (9mm) line fully loose. It just won't come out, even when the nut is spinning. I am worried I will damage the lines or threads. Am I missing something??

Hello everyone. I just picked up a 1969 FJ40 and love it. I am new to this and have read other posts, but I am still having issues with my brakes. Everything stock 4 drums all around. I was getting the old fluid out of the master cylinder and brake lines, and bled all the brakes, starting...