Recent content by Lele

  1. L

    80 4.5 crank but doesn't fire..

    I download the wiring diagram before touching any electrical. It's the wire that goes from the IGN fuse to the ECU. The pump is gone. I first tried from the Fuel Pump Relais and then I removed the pump from inside the tank and it's dead
  2. L

    80 4.5 crank but doesn't fire..

    Unfortunately I bought it non runner so I'm finding out day by what's wrong. I guess the Fuel pump is not affecting anything so I'm just wait for a new one. The CEL is on so I guess the ECU is ok ( and I really hope so ) Paperclip didn't work..and I tried both Bonnet OBD1 and inside OBD2 but...
  3. L

    80 4.5 crank but doesn't fire..

    I also checked the Igniter connector I2 . 1 IGF 2.2V 2 IGT ? 3 12V 4 Park 3.2V 5 Coil 12V and on the coil I have 12 V on both as I switch the key on
  4. L

    80 4.5 crank but doesn't fire..

    Hi everybody... I removed the alarm but nothing changed so I decided to test all wires. First I checked that the key is working and I get tension to the 7.5A IGN fuse. I checked the ECU But I just have 100 mV.. I don't know if I did something smart to check it so far but still can't make it...
  5. L

    80 4.5 crank but doesn't fire..

    One more thing.. Could this be a possible cause of my problem?
  6. L

    80 4.5 crank but doesn't fire..

    So The fuel pump wasn't working so I removed it and, indeed, was dead as it's been sitting for a while. I connected on The OBD1 E1 and TE1 but the CEL is not blinking. I tried a Bluetooth OBD2 but it doesn't give me any fault. I tried using TIS but Chan-H chan-L K and L are red.
  7. L

    80 4.5 crank but doesn't fire..

    Thank you very much for you advises so far. I saw few videos on youtube with the paperclip to read out faults and I'm going to do it tomorrow and I will keep you updated.
  8. L

    80 4.5 crank but doesn't fire..

    So I already tried the fuel pump as in the link you sent me and I even tried testing the pump from under the seat but no sign I tested relays making sure the circuit is opening and I have many relays to swap and try. Pull the CEL code, have an autoparts store plug an OBD2 reader into it. What...
  9. L

    80 4.5 crank but doesn't fire..

    Hi everybody I have a 95 FZJ80 imported from the US to Italy. I bought it already non runner so I'm struggling finding out what's wrong with it. I already read many threads and tried many things but can't find a solution. So relays and fuses are ok and CEL is on. 1.Fuel gauge is not working so...
  10. L

    1995 4.5 crank but not starting

    This is the result of the USB cable check
  11. L

    1995 4.5 crank but not starting

    I ordered a TIS USB cable but I can't read the OBD and ,unfortunately it still doesn't crank as no sparks. CEL is ok. How do I know if there's any anti thief device?
  12. L

    1995 4.5 crank but not starting

    It's not a stupid question.. I was thinking about that too but the previous owner told me there was not. I found few tutorials how to test the Igniter and I will try next to do it. I'm open to suggestions anyway
  13. L

    1995 4.5 crank but not starting

    Thank you very much for your help. I'm a newbie to this engine that's why my electric knowledge is zero. I replaced the CEL bulb and it is working now but still no spark.
  14. L

    1995 4.5 crank but not starting

    so this is my actual situation. -no engine check light (relais and fuses are ok) - No spark, no current at distributor, no current out of the coil. I tried to test the coil as I normally do so just giving current straight from the battery but it doesn't wokr ( I tried on 3 different coil) -...
  15. L

    1995 4.5 crank but not starting

    12V at B+
Back
Top Bottom