Finished the other side. Took her out driving around the backyard. I stillrub when going backward down a hill at full turn. I heard it and jumped out. Seems like it's hitting my passenger side front fender right where my windshield washer reservoir is mounted. Not sure how to fix that
Also I always unhook the battery when welding on motorcycles. I've never done a car. When I hooked the battery back up the car was acting all weird and wouldn't start. I was scared I was suppossed to pull breakers or something and fried the car. After about 10 minutes she was back to normal.
Ok I pulled off the wheels, threw some new brakes on, did the pinch weld flattening and then did the body mount chop. Pretty easy really. The hardest part was cutting the body mount. I bought some 2" cutting disc's for my air grinder but I didn't have the correct chuck to use them. I...
I Def will,
I'm hoping this is all I need to do. Barely scrubs when turning the wheel going forward but really feel it going in reverse. Next step is some bilstein 5100s. I'm going to throw new brakes on the front this weekend when I'm in there beating the pinch weld and doing the BMC.
Niiiiiiiice, I'm ok with welding. Hopefully if I cut the body frame mount the spacers will work but I seriously doubt it. Usually I'm too conservative but this time I decided to go all out and it didn't work out
Thanks. After looking at bearing hubs. It appears that after I put a rotor over the studs then they look about as long as the ones I have now. Weird. It looks sketch but I guess that's normal. Oh well. Instead of bearings / hubs / brakes. Just gonna ditch the spacers and roll like bon Jovi and...
Thanks banandalorian..Maybe I'm worried too much. The bolts aren't cut down but they look short. I guess next stop is cut and weld body mount and throw some new bearings and brakes when I'm in there. I drove around today with the spacers on the back but no spacers on the front. Drove ok, I...
Maybe it's the offset?? I'm Def hitting the body mount but only on hard turns. Cutting out the fender plastic is easy. I don't think I'm hitting the pinch weld though but I can see where I'm rubbing the body mount.