Recent content by Kodz

  1. K

    HZJ80 new H152 gearbox clutch and flywheel modification

    OK so ran into some issues with the clutch when I compared it to my 1hz clutch the the vdj79 version was a fair bit thicker as in the clutch would be closer to the fork when engaging. I think because the vdj79 has a longer bell housing and fork set up, travel may be different as well. Without...
  2. K

    Clutch HDJ80

    Was looking at this one in the photos, not sure why one is purple when they are the same clutch would this be too heavy duty? can't find many reviews anyone had experience with this one before pros cons ect?
  3. K

    Clutch HDJ80

    Decent clutch suggestions for 1hdt that is pretty much on par with oem not after somthing with too much pedal pressure
  4. K

    HZJ80 new H152 gearbox clutch and flywheel modification

    Thanks everyone going to get a hdj80 flywheel as already have 300mm clutch that came with the h152 gearbox from a vdj79 I have adapted to suit my hzj80. Think I will order new bolts instead of reusing just to be safe. The 300mm clutch and pressure plate is like 3 or 4 kg heavier than my original...
  5. K

    HZJ80 new H152 gearbox clutch and flywheel modification

    Thanks guys have a new problem now the flywheel from vdj79 has 14mm holes and bolts that came with it are 14mm 1.5 thread as apposed to original 12mm 1.25 thread. I am thinking of getting the bolts stepped down so that they are large enough to suit 14mm holes in fly wheel but step down to 12mm...
  6. K

    Flywheel Torque spec?

    Any idea what torque spec for flywheel of a 1hdj80 ? Thanks in advance
  7. K

    HZJ80 new H152 gearbox clutch and flywheel modification

    Just on the odd chance does anyone here know what torque setting I should be using on a flywheel that came out of a 2023 vdj79 series or if loctite should be applied I am fitting it to hzj80 model. Thanks in advance
Back
Top Bottom