Recent content by inthepines

  1. I

    2000 LC - Crank, No Start - Immobilizer working

    Just wanted to update this in case anyone had a similar issue. It was the Crankshaft Sensor. There was some corrosion starting on the sensor too, so it was pretty stuck but I was able to get it out with a wood dowel and a hammer, hitting the connector lightly to rotate the sensor in place. I'm...
  2. I

    2000 LC - Crank, No Start - Immobilizer working

    A little update, I checked the wiring from the crankshaft sensor back to the ECM, and both wires tested good (<1 Ω). I was able to test the sensor itself and got a similar reading as from the ECM side (8.5 kΩ), which appears to be out of spec. I took the bolt off that holds the sensor on, but...
  3. I

    2000 LC - Crank, No Start - Immobilizer working

    I didn’t change the relay out but with the security light operating normally (flashing until I put the key in), I figured the EFI relay and fuse were working correctly. I may be misunderstanding how that all works, but with the EFI fuse pulled out the security light won’t stop flashing, even...
  4. I

    2000 LC - Crank, No Start - Immobilizer working

    Luckily I did find a wiring diagram here: LC100 Factory Service Manual - https://lc100e.github.io/ (Electrical Wiring Diagram > Overall Electrical Wiring Diagram > Engine Control > 2UZ-FE (1998.1 - 2000.7)) So it looks like the green wires to the cam and crank sensors ultimately splice...
  5. I

    Loose connector in ECU Question

    I was just taking this apart to get at my ECM. I believe that is for the glovebox light but I could be wrong. I have the 2UZ-FE, but I wouldn't think that would be different.
  6. I

    2000 LC - Crank, No Start - Immobilizer working

    Hey everyone, I have been working on my new-to-me 2000 LC on and off. I bought it about 10 months ago, and found out soon after that it needed an alternator. I had some other work taking up my time, but finally finished up the alternator replacement, and got everything put back together. At...
  7. I

    New Member First Post - 2000 LC

    Thank you! Definitely nice to see as well, as I don't see many cruisers on the road up here. This one was on Facebook marketplace in Searsport. It is definitely tough to find a clean truck around here, and with $8-10k 4Runners and others I looked at having holes in the frame, this one being at...
  8. I

    New Member First Post - 2000 LC

    Hey everyone, I just purchased my first LC, a 2000 with 247k miles. I originally started looking at 4x4 Toyotas with the 2UZ, like the 4Runner and Sequoias in the 2000s, but I was keeping the search open to 100-series Cruisers too. I am in Maine, and we have plenty of rust up here. After...
Back
Top Bottom