Recent content by imtsez

  1. I

    01/98 LX 470 Rear Right AHC Leak

    Pulled it out and reseated everything. Was able to tighten the nut all the way down. No more leaks. The bushing still does sit at a slight angle. After bleeding, all 4 corners sit level on L, N & H. No issues using the updated shock.
  2. I

    01/98 LX 470 Rear Right AHC Leak

    Got everything installed, however AHC fluid is seeping from the new O-Ring & Backup Ring. After installing, the bushings sit at an angle. Does this look correct to anyone who has done this before? I pulled it out and reinstalled and they still sit like the pictures below. My plan is to pull...
  3. I

    01/98 LX 470 Rear Right AHC Leak

    Ended up ordering a used accumulator, new shock, and new line. Will update after install to let you guys know if everything works, just in case anyone is curious.
  4. I

    01/98 LX 470 Rear Right AHC Leak

    It doesn't show it in the pictures, but you're right. The hydraulic ram itself isn't leaking, just the line from the accumulator to the ram. My issue is they no longer sell the correct line for my ram since my car is from 01/98. In 03/98 they updated the ram and hose to a bigger size fitting...
  5. I

    01/98 LX 470 Rear Right AHC Leak

    Gotcha, so since the line is leaking and NLA, will the newer pressure hose, and shock work in my setup if I replace both? The other 3 corners are stock. From what I could find, 4916360041 will not work with the shock that is currently in there. Could be wrong.
  6. I

    01/98 LX 470 Rear Right AHC Leak

    Hey guys, I had a question regarding the AHC components on my 1998 Lexus LX470. Build date 01/98. The rear right AHC hose is leaking (P/N 49163-60010) and it looks to be discontinued from Lexus. The top of the shock also looks to be leaking, and I was wanting to replace the shock to be safe...
Back
Top Bottom