Recent content by HCP2311

  1. HCP2311

    Vacuum assisted PCV scavenging

    No it didn't run at all. 😂 The exhaust cam was 180 out of time and there was a vacuum leak at the plenum. (Which was my fault. I forgot to put a gasket between the two halves. Then the charcoal canister was clogged and the fuel pump stopped working. 🤔 Then the IAC wasn't working right. Lol oh...
  2. HCP2311

    Vacuum assisted PCV scavenging

    All the above. Not me personally, I thought that was above my paygrade, I took the engine to Southern Cylinder and Head in Huntsville, AL for the rebuild. I did remove and reinstall the engine and trans myself. When I bought the rig early last year the head was off for supposedly a blown head...
  3. HCP2311

    Vacuum assisted PCV scavenging

    Stumble, but not die. Before I blocked the breather hose at the throttle body you could get maybe 30s of run time if you removed the oil cap. I don't have any fittings that are the correct size to measure vacuum at that hose, but it was significant enough that it could be heard by ear and felt...
  4. HCP2311

    Vacuum assisted PCV scavenging

    I'm in my 30's lol and definitely do not have much experience. I did take ASE engines, transmissions and suspensions at Iowa western several years for fun, which led me to a bachelor's in mechatronics but my work experience is army medical. Idk how good the advice would be for recommending...
  5. HCP2311

    Vacuum assisted PCV scavenging

    NONE of my other vehicles do this. (93 850, 04 TJ, 09 ML320, 09 XC90, 08 JK, 19 JL, 10 C30) Are you saying this is specific to the 1FZ-FE? Because I could see it, I really don't see how it could be any other way with the breather hose right in front of the throttle plate with no 1 way valve...
  6. HCP2311

    Vacuum assisted PCV scavenging

    WHAT?? really? 🧐
  7. HCP2311

    Vacuum assisted PCV scavenging

    Honestly when I think about it, we already have vacuum in that area. There is probably a way to tap in to it. I'll update here in a few days if plumbing the catch can back in to PVC causes a lean condition with that breather filter on. I want to say it will, but it may be such a small amount of...
  8. HCP2311

    Vacuum assisted PCV scavenging

    I appreciate the explanation and It answers my question really. I'm going to try plumbing back in to PCV vacuum and leave the breather open with the filter and if it doesn't cause a lean condition. I'll keep it that way.
  9. HCP2311

    Vacuum assisted PCV scavenging

    This is the current set up. I'm waiting on a elbow to change the red hose and I'm trying to decide if I should try attaching the Catch Can to the plenum for scavenging. The original problem was when the engine was running and you removed the oil fill cap the engine would die. What I tracked...
  10. HCP2311

    Vacuum assisted PCV scavenging

    Why not install a catch can with a vent on the pcv line? Wouldn't that solve the contaminate issue? I have noticed that at operating temp and idling some crankcase vapors escape through the PCV vent I've installed on the breather port, but above 1500rpms the flow switches directions and starts...
  11. HCP2311

    Vacuum assisted PCV scavenging

    Well I've already plumbed it for VTA, but it was an identical set up to the pictures in the front of the FSM on here. It seems to be breathing fine with the VTA, oil pressure ranges from 10psi up to about 60ish on hard accelerations. The VTA solved my issue I was trying to solve which was...
  12. HCP2311

    Vacuum assisted PCV scavenging

    I didn't measure it but more than the PCV hose was pulling. The filter is a WIX 42159.
  13. HCP2311

    Vacuum assisted PCV scavenging

    Is it necessary for the 1FZ-FE? A little context, ill explain more than I probably need incase I label something wrong. The Valve cover has two PCV hoses: One to the intake plenum, plumbed with a 1 way valve. (Exhaust side) The other is open between the valve cover and BEFORE the throttle...
  14. HCP2311

    1FZ-FE Intake Manifold

    Yeah, I did that and didn't notice anything leaking. In hindsight I don't actually know if its burning coolant, that's just what I was told. (I was also told at the same time that it had excessive crankcase pressure, and I found about 6 dirt dauber eggs inside the PCV hose The engine was just...
  15. HCP2311

    1FZ-FE Intake Manifold

    I pulled the throttle body off and noticed that the top two bolts didn't seem to be as long as they could be and probably only had a few threads in. So possible leak there. The gasket looks like it might have some coolant residue on it. The throttle body on the filter side is COVERED in what I...
Back
Top Bottom