The air lines push right in. I was able to mount the 2 shrader valves in pre-existing holes in the bumper and used a bicycle pump to put 30psi on passenger side and 40psi on driver side to correct droop and lean. A quick ride around the block was a little bouncy but smooth. Still plenty of flex...
I removed the bumpstops and their brackets and used the same hardware and holes in frame. I did The whole job in the driveway with a floor jack and 2 jack stands. I managed to avoid removing the shocks
I was worried about the T brake line but the mount was elevated just enough to clear the top. I had to cut a piece out of the mount as it would not slide under the T line.
I read all the forums and the Boss seemed to be the most preferred but size could interfere with rear disc brakes. Firestone has a tall thin unit with good reviews but it looked flimsy. I ordered the bas from John at Cool Cruisers. Because I already had a lift I had to get the 3 baffle bag that...
First of all I am no expert. I believe that the stock turn signals do operate through the hazard relay system and you will likely have to at least hook up the hazard lights. The Toyota flashers are mechanical and require a certain current to be drawn through them before they switch on or off. If...
Thanks for all the hospitality. The mirrors and bumpers are ICON (his money not mine). My first ride home was 2 1/2 hours on the interstate. There were a lot of different loud noises and it was all new to me so I’m not sure how much was wind from the roof rack. I have a 15 min commute on a...
I finally bought this‘ 75 today that had been listed for a while. Already so many questions. I look forward to the help, support, and camaraderie of this group.