Recent content by ECVRed

  1. ECVRed

    Sway Bar Newbie questions

    It drives nice till I get to 45 or 50mph. Then I have to keep both hands on the wheel
  2. ECVRed

    Sway Bar Newbie questions

    Yes. Onboard compressor. I just fixed the electrical to it so it won't be a fire hazard
  3. ECVRed

    Sway Bar Newbie questions

    Thank you for the replies guys. This truck has a fairly substantial lift. I am not sure how big it is but the guy I got it from said 5". If I am going to get sway bars will stock sway bars work? Any recommendations?
  4. ECVRed

    Sway Bar Newbie questions

    So I am a newbie to the world of 4x4. I have owned my 1991 fj80 for a few weeks and I just got it running good enough to take it out on a trail. I have trip planned with my friend this weekend. I have heard that when going over large obstacles that it is best to disconnect the sway bar. The guy...
  5. ECVRed

    1991 3FE engine idle changes at start.

    Instead of doing the correct way and taking off the intake I decided to take a shortcut and run a single wire over and around. Good news is that the idle is correct now at somewhere around 650. I am choosing to wait to take off the intake until I have to money and time to buy new injectors and...
  6. ECVRed

    1991 3FE engine idle changes at start.

    So I found the problem (at least one of them). One of the wires that leads to the ISC valve is open circuit. This would stop the ISC from working correctly. The problem is that to get to wires that I need to inspect and work on I have to take off the air intake (looks like a pain in the butt)...
  7. ECVRed

    1991 3FE engine idle changes at start.

    I got the proper documentation now (the 3fe manual and the 1991 FSM do certainly have some differences in the electrical system). At this point I am all but certain that this idle problem is something electrical. I am starting by troubleshooting the grounding system. I have already found some...
  8. ECVRed

    1991 3FE engine idle changes at start.

    I just realized that there are differences in the wiring from the 3fE repair manual to the 1991 version of the 3FE that I have. I looked at the documents at the download section that 4ADVNTR linked and I am not finding the one that matches what is actually going on in my engine. I am...
  9. ECVRed

    1991 3FE engine idle changes at start.

    Thank you to everyone who has responded so far or is about to. I was able to find the time to work on my FJ80 this morning and I have found what seems to be an electrical problem. I am using the 3FE repair manual that I found online because I don't have the FSM or Wiring diagram for the proper...
  10. ECVRed

    1991 3FE engine idle changes at start.

    Thank you for the replies guys. I wasn't able to work on it yesterday and I have to work today. I plan to tool around on it tomorrow. When I set the golden screw to about 3/4 or a turn from closed it can sometimes idle around 650 and sound perfect. Then I turn it off and on again (within in...
  11. ECVRed

    1991 3FE engine idle changes at start.

    I recently traded my Ford Excursion for a 1991 fj80. I am digging my new truck and have been working out the bugs. This site has been a big help. The engine runs strong and sounds good but the idle changes at almost every start. I set the golden screw so that the lowest idle is around 600 and...
Back
Top Bottom