Recent content by Dino2007

  1. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    I'll take a pic once covers are off, then take the cams off and take more pics.
  2. Dino2007

    Multiple misfires after both heads and timing replacement, where to start?

    Hi Steve, I reposted this in the 100 series forum and we found the issue - Cyl #1 and Cyl #6 having intake valve issues, failed both compression and leak down tests. I am disassembling all of the work done, and going to check heads, probably needing at least partial rebuild or ordering new heads.
  3. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Will take em off during the weekend and ask how to inspect. In the meantime do you see any correlation in that, that the opposite cylinders having the issue. I.e. #1 is at the tdc power stroke, #6 is at the exhaust stroke.
  4. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Same thing on Cyl 6. Air coming out of throttle body intake when #6 in tdc for this cyl. Also I rotated the crank back to TDC#1 and checked cyl 6 now the air was coming out of both intake and exaust. Intake should have been sealed in that position for #6. So what are the next steps now? See...
  5. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    I think I found tdc for cyl 6. Initially It was all the way up, as was cyl 1 at tdc (confirmed with t markings) so I measured depth with a metal rod for #1, marked with tape, then inserted the rod in cyl 6 and rotated crank until it disappeared and reappeared again now at tdc. Cyl 1 would be at...
  6. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Performed the ldt on cylinder 1 as it was easy to TDC with timing marks. It's leaking out of the throttle body intake at a high rate. I need to research the best way to tdc cylinder 6. If you can give a hint, which tools to use for that I'd greatly appreciate it. So on cyl 1 the leak is so huge...
  7. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    One the R side yes I had the bolt, on the L side, I forgot, and I had to tension the spring to insert the bolt later, when reinstalling cams, teeth on the exhaust cams were 100% aligned after turning crank to tension the belt, not a single mm apart. ofc the bolts were removed. I ordered the...
  8. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Where would I connect the gauge on 2uzfe?
  9. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Injectors - OEM denso, I actually have 2 sets, original and refreshed, tried both, sparks -OEM denso, cats are - Toyota/Lexus OEM for VVTI. I haven't been driving since doing work, since the engine is malfunctioning. I haven't reset any adaptations - not sure what they are. The codes are P0...
  10. Dino2007

    2UZ Fe Help - Multiple misfires after both heads/timing belt replacements

    Hello forum, I had a bad intake valve on bank two and had p0171, 174, very large short and long fuel trims, after driving a bit with engine losing power, so I replaced both heads with rebuilt heads purchased off Clearwater Cylinder Heads, also timing belt/pump, spark plugs, injectors, front...
  11. Dino2007

    Multiple misfires after both heads and timing replacement, where to start?

    Hello forum, I had a bad intake valve on bank two and had p0171, 174, very large short and long fuel trims, after driving a bit with engine losing power, so I replaced both heads with rebuilt heads purchased off Clearwater Cylinder Heads, also timing belt/pump, spark plugs, injectors, front...
  12. Dino2007

    P0171 and P0174 saga, intermittent on 2006 GX

    I had p0171 and p0174 that were really bad, my ltftl and stftl were off, additionally I had p0420 p0430. I had random misfires and p0441 at one point too. I fixed the 171 and 174 by replacing intake manifold gasket and rubber sealers on injectors (on bank 1 only for now). I also had a leak on...
  13. Dino2007

    Pics of 2024 Toyota Land Cruiser Prado

    More like this. Hope it's offered in USA
Back
Top Bottom