Not really sure what the original looked like but I added the ability to pull from the top. Quality could be a little better but this will due for a working prototype - 3D view and download - Fusion
Before I start creating the knob to print a replacement for my broken glove box one, I was wondering if anyone has already done it and if they'd be willing to share.
I did find this kit - "Leveler Block" Cures the Driver's Side Lean of Most FJ40s
I just thought maybe it was a damaged spring. I've only had it a couple months. Need to get it in the dirt and see if there are any issues. Otherwise lean is no big deal to me.
New switch is in and B.I.N.G.O! ACC now powers the radio (no wiring change) and the truck doesn't jump when turned to ON but not STARTER. Thanks!
P.S. The switch I pulled out did not look the same. I wonder if it was an aftermarket.
Part is ordered. Pulled the wires out again after looking at the wiring diagram and there is an Light Blue/Red wire that should be ACC power but it does not have any at this time. It'll be interesting if the switch straightens that out. I'll post again after I get the new switch installed. Thanks.
Got it. Not the cylinder but the electrical connector. Two options, aftermarket or OEM - $60 difference in cost. Any difference in quality or function?
In the ON position. There's an ACC on the switch which I would have thought would provide power but with the wires that were in the radio area it did not. I have another ignition switch, I'll try swapping it out and see if it makes any difference. Thanks.
Possible I guess. There was a radio there previously and these wires were existing. I believe the color is light blue. Trying to find that in the wiring diagram. No information on the radio. Just says 'Optional' with no connections.
Don't know if that headline makes sense but I've been wiring an AM/FM radio and you use 12v constant and 12v ignition. So when I turn the ignition on to test (but not to start) that connection, it sounds like the starter solenoid is engaging causing the truck to jump a little. Is that normal...
That was my first guess but when I placed it in there, items didn't seem to line up. Thought maybe a different make model? Looking at it now in the picture maybe it is a dash wire shield?
Thanks everyone for input. Looks like I need to crawl in there a little further.
Thinking the mod in question is just a simple 12v solenoid (normally closed). Fumes gather in the charcoal canister when the ignition is off, ignition on, the solenoid opens and the manifold vac cleans out the canister?