Recent content by BigBlueLC

To the top! Still available… make me an offer Bay Area folks

$25 and you pick it up Spare wheel and tire from my 1995 FZJ80 - It’s in my FIL’s garage and he wants it out. Come get it for $25! Tire is a relatively unused Kumho Road Venture AT 285/75R/16 (didn’t see a date code, but it’s an older tire - ok for a spare, not for daily). Wheel is in ok...

I had a similar issues (by adding similar equipment - stereo, lights, winch, alarm) and had a no-start, no OBD-II readings issue. Thought it might be the ECU, checked fuel regulator... and I think the problem was solved by just swapping out a new fusible link, which did the trick. Caveat is...

Looks like it will work on the 60, as well - it'll fit as long as you can gutter mount the rack (and pictures look like that will work). ROOF RACKS & ACCESSORIES - https://arbusa.com/toyota-land-cruiser-60-series-1980-1989/roof-racks/ (same exact rack listed for both 60- and 80-series on their...

Thanks for the replies so far. Ran the engine and didn’t detect any suction, then blew into it and could hear air flowing out somewhere. Can’t seem to find anything that looks remotely like this on the vacuum hose diagram. 🤔

Hey everyone, had an issue with a rough idle and electrical gremlins, resulting in stalling out about 100 miles from home. Got towed to a local Toyota dealership, who couldn’t diagnose the problem, so towed back home to work on it myself… popped the hood and found this hose with a plug in it. I...

TTT

Sent you a PM.

For sale is my steel ARB 1/2 roof rack (43”x49”) with mesh floor and mounting kit. It was installed by the PO about a month before I purchased the truck in Oct 2020, then used by me for about 6 months to carry a spare tire. I am selling because I swapped it out for a FrontRunner rack in...

Bump Price lowered to $550

TTT

For sale is my steel ARB 1/2 roof rack (43”x49”) with mesh floor and mounting kit. It was installed by the PO about a month before I purchased it, then used by me for about 6 months to carry a spare tire. I am selling because I swapped it out for a FrontRunner rack in preparation for a RTT. This...

Had a similar issue. Tried brute force, but simply wasn’t strong enough. Humbling. Then, tried boring it out a little with a drill bit. No dice. Finally, screwed a fat bolt in to stretch it out a little bit. Sat for like an hour, blew out any rubber bits with a compressor, coated the hose in PS...

I also did not get a discount. Oh well. As far as the mount, they told me their newer design was meant to avoid the holes not lining up properly by using a “slider” setup. Have had mine for a week and they’re great!

Awesome, looking forward to seeing the final product! Also very much looking forward to putting 2020 to bed and getting back to some semblance of normalcy. But that's a whole different topic.