Seems I have 2 accounts here, Not sure how that happened. Repost to this one.
No CEL would crank but no start. I determined that the faults were caused by poor workmanship "by Me". I had inadvertently connected a ground to a +12vdc power source and in doing so created a huge world of hurt for...
Thanks to every one who has replied your input is much appreciated.
The Fault as I see it is eigther an open/short circuit within the engine Harness. This I believe because of the identified burnt wires that lead to the engine oil level sensor (replaced OEM as part of engine rebuild).
Finding...
Hi Jon. The answer is Yes to all the points you have made I had previously replaced fuesable links with OEM and it had tested ok but to be sure I have replaced again with another OEM link, result is the same. All links are passing power at 12.46 VDC Current batt voltage.
had previously replaced fuesable links and had tested ok but to be sure I have replaced again with another OEM link. result is the same. All links are passing power.
Hello again. Have made a fair bit of progress on this build but have come up aginst a bit of a wall. As the title states I have no CEL which in turn points to the ECU not being powered up hense no spark, fuel Ect. The engine does crank and I have tested every relay and fuse I can find, all...
Thans very much jonheld for the confirmation. Seems that I just need to learn my way around this site. Sourced locally and ordered. Thanks again. Cheers.