Recent content by Bazz

I had a similar issue after replacing some seals and it turned out to be an air leak. Re-torqued everything I replaced and it fixed it. Some good info from some smarter folks in the thread I posted when I had the problem 1HZ Injection Pump Question -...

Fortunately the inlet pipe isn't leaking anymore, I just forgot to torque that down after install since I didn't have it in a vice when I was doing the seals. I'll put my camera scope down there and see if I can locate where the leak is coming from. If it's easily accessible I'll try to do that...

Ok so I got it running. For reference, anyone reading this later. I wasn’t getting any fuel out of the upper fuel outlet, and definitely not to the injectors. Must have pumped vigorously for 2+ minutes (😎) and prob 2 min total of cranking, so I knew it was a fuel problem. I bought a fluid...

I definitely lined up both pulley match marks before removing the belt and pump and ensured everything was lined up when putting it back together.

Match mark are lined up, and they were prior to removal. I didn’t remove the top cover because that was the first thing I replaced a while ago to stop the leak and it worked just fine after (aside from not stopping the leaking). Reading more on the timing procedure it seems foolish to think I...

All I really did was remove it to replace some seals and then put it back in. All the pulleys were aligned and I didn’t move anything from its original position, pulleys or the pump. I was hoping I wouldn’t need to check timing under this scenario, but I’m an idiot so I’m probably wrong there...

Hey all, I recently replaced the diesel injection pump on my ‘93 HZJ73 and now it won’t start, just keeps cranking. Was working fine before, just had a leak. I’ve given the filter about 20 pumps and have cranked it a total of maybe 30 seconds to a minute over several attempts. Is it normal...

Shims in from Partsouq. They used to ship so fast but damn the last few orders have taken forever. Anyone else experiencing that?

Yeah, I don't know what a fivres top is either. Strange that if it's aftermarket they wouldn't just make it to work with Toyota seals.

I don’t think it’s NLA. I saw it recently on partsouq. 6315190K02

Oh, I’m not sure about the silver ones, but the white (at leas the two I’ve had) have a texture almost like a fine spray wall texture to them. I’m sure when many repaint them they probably sand this down and don’t bother with trying to recreate it.

Sweet. I’ll shoot you a text. It’s two cruisers I’ve got from you, to be exact 😉

Are you gonna re-apply the texture? I have some repairs to do and plan to repaint the whole thing, but curious what texture you use if you found/find a good match.

Damn, @SNLC got me excited there for a sec. My problem is I want Toyota seats, no matter how uncomfortable 😩 @joekatana we talking majorly different or an adapter could easily be made?

Hey All, I am looking to possibly buy some of these 70 series takeoff seats from Cruiserparts, front row. The seats come from a 2018-2020 HZJ79 Double Cab, I have a 1993 HZJ73 which they would go into. LINK I'm curious if anyone knows if they'll be direct bolt on, or if the floor pan...